6-9743-21-22 [Discontinued]Comapct High Pressure Steam Sterilizer with Pre-shipment Inspection Document KTR-2322
chemicalproducts

6-9743-21-22 [Discontinued]Comapct High Pressure Steam Sterilizer with Pre-shipment Inspection Document KTR-2322

model: 6-9743-21-22
category: chemicalproducts

Product Description

Product Model: 6-9743-21-22 Features The air vent type […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 6-9743-21-22

Features

  • The air vent type with temperature detection and time control solenoid valve ensures sterilization according to load.
  • After sterilization, cool down naturally, open the lid, lower the temperature to safety, and then turn off the operation lamp.
  • It also has a forced exhaust valve.

Spec

  • External Dimensions (mm): 370 x 300 x 400
  • Can Body Dimensions (mm): φ230 x 220
  • Can Capacity: 10 L
  • Operating Temperature Range: 110~125°C (Setting/1°C Interval)
  • Operating Pressure Range: 0~0.16 MPa
  • Timer: 0~60min (Digital Temperature Control)
  • Can Body, Lid, Surface Plate Material: Stainless Steel (SUS304), Bottom Packing: Silicone Rubber Molded Product
  • Outer Plate Material: Steel Plate/Melamine Baked Coating
  • Anti-Depletion Device: Heat Sensing Hydraulic Switch
  • Pressure relief device: Cut-off method with pressure sensing sensor (Heater power off, alarm buzzer, red lamp lights)
  • Safety Valve: Stainless Spring System Blow Pressure: 0.18 MPa
  • Breaker: Overcurrent breaker (ground fault breaker: optional)
  • Heater: 1.0 kW
  • Power: 100 VAC 50/60Hz 10 A
  • Weight: 16 kg
  • Attached Stainless Steel Net Basket: Φ210 x 200 mm x 1
  • Attached Exhaust Drain Receiving Tank: Poly Tank x 1
  • *This product is not a medical device. Please *** it for research and development purposes.
  • *It cannot be ***d to sterilize medical instruments.
  • Annex: Inspection and Inspection Documents
  • *The product with inspection certificate is an original service of AZONE that checks the control and electric engine at the time of shipment and issues an inspection certificate.
  • This product can be validated (IQ/OQ). Please contact us.
  • *Validation Service is a service where installation qualification (IQ) and operational performance qualification (OQ) are performed at the customer's site and inspection documents are submitted.

*This product might require extra fees.

Related product recommendations

You may also be interested in the following products

1-1637-04 [Discontinued]Brush Goat Hair/Wooden Handle 190 x 30 x 30 439
chemicalproducts
2-9066-01 Disposable Box EVO30MONO
chemicalproducts

2-9066-01 Disposable Box EVO30MONO

model: 2-9066-01 brand: AS ONE Corporation