Spec

• power supply Voltage: AC100 to 240 V 50/60 Hz
• Allowable power supply Voltage: AC 85 to 264 V
• Power Consumption: 27 VA or less
• Inrush current: 40 A/10 ms or less
• I/O power supply: DC24V/145 mA
• Acceptable I/O power supply Voltage: DC 20.4 to 26.4 V
• insulation resistance: 20 Mω or more between the external terminals of power supply AC and protective earth terminal (500 VDC Mega) *
• Withstand voltage: power supply AC between external terminals and protective earth terminal 2,300 V 50/60 Hz for 1 minute (Leakage current 10 mA or less) *
• Withstands noise: 2 kV (power supply Line) IEC 61000 -4 -4
• Vibration resistance: JIS C 0911-compliant 10 to 57 Hz amplitude 0.075 mm, 57 to 150 Hz acceleration 9.8 m/s 2 X, Y, Z 80 minutes in each direction (Sweep 8 minutes x sweep 10 times = Total 80 minutes)
• Shock resistant: JIS C 0912 compliant 147 m/s 2X, Y, Z 3 times in each direction
• Operating ambient temperature: 0 to + 55 ° C
• Ambient humidity: 10 to 90% (free from condensation)
• Ambient air: No corrosive gas
• Storage ambient temperature: − 20 to + 75 ° C
• Terminal screw size: power supply input/M3.5, Control input/output/M3
• Instantaneous power failure detection time: Instantaneous power failure is not detected for 15 ms or less
• external dimensions : 110 x 100 x 82.5 mm (W × H × D)
• Mass: 1 kg or less
• Structure: Built-in type
• Mounting: M4 screw (Two Points) or DIN rail mounting
• Number of outputs: 32
• Output performance: Open collector output Maximum open and close ability DC 26.4 V 300 mA (1.6 A or less per 1 connector)
• Number of banks: 8 banks (resolution 360), 4 banks (resolution 720)
• Display: 7-segment LED (Execution Bank, rotation speed, Current Angle)
• Response rotation speed: 1600 r/min (resolution 360), 800 r/min (resolution 720)
• Detection cycle: 100 μs or less
• Reproducibility: 0.2 degrees
• Memory backup: Nonvolatile memory (EEP-ROM) write count: 100,000
• Control Units: 1/360 (resolution 360), 1/720 (resolution 720)
• Origin correction: 1 to 359 (resolution 360), 1 to 719 (resolution 720)
• Backlash compensation: 1 to 179 (resolution 360), 1 to 359 (resolution 720)
• advance correction
• Advance value input range: 1 to 359 (resolution 360), 1 to 719 (resolution 720)
• Speed input range: 1 to 1600 (resolution 360), 1 to 800 (resolution 720)
• * When the speed input is 0, only 0 is accepted as the advance input.
• Control input: START, TRIG, BANK1, to 3, RESET photocoupler Input impedance 4.7 kΩ
• Control output: RUN, ERROR, M-DET open collector output Maximum open and close ability DC 26.4 V 300 mA
• Speed detection accuracy: 5 r/min or less