Spec

• Model number: JKO-O2LJD3
• Proof of calibration: none
• Detection principle: Galvani battery type
• Response speed: about 5 seconds (90% Response), about 40 seconds (99.5% Response)
• Warning: Two levels (Can be changed arbitrarily), electronic buzzer intermittent sound (80 dB), red LED flashing x 2 pieces
• Alarm output: Relay non-voltage 1c contact, maximum load capacity/300 mA, 30 VDC
• Analog output: 4 to 20 mA (FS)/Special harness (attachment)
• Power supply : AA size alkaline battery x 4 pieces (test attachment) or AC adapter (attachment)
• battery life span: 2000 hours
• Size: 82 x 38 x 145mm
• Weight: Body/190g, Sensor/140g
• Lead wire length: about 1.7 m
• Wall bracket included.Use an opal light bulb if you have an ordinary lamp shade or lamp and want an even, diff***d distribution of light.Use a clear light bulb if you have a lamp with a perforated or cut-out pattern or other airy, open design and want the pattern to cast effects on the wall.
• pressure of *** range: atmospheric pressure ±10%
• Measurement range: 0 to: 25.0%
• Resolution: 0.01%
• *Measure the pressure of the measuring gas in a constant state.