63-7808-09 FTDI Chip FT231XQ-R, USB Transceiver FT231XQ-R
Electronic/Electrical Parts and Controll Equipments

63-7808-09 FTDI Chip FT231XQ-R, USB Transceiver FT231XQ-R

model: 63-7808-09
brand: FTDI Chip

Product Description

Product Model: 63-7808-09Product Brand: FTDI Chip Featu […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 63-7808-09
Product Brand: FTDI Chip

Features

  • FT230X, FT231X, FT234XD - Full Speed USB-UART, FTDI Chip
  • FTDI Chip's FT230X and FT234XD are Full Speed USB-Basic Serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface. This device has built-in MTP memory and a clock circuit that does not require external crystal oscillation, thus requiring fewer external components. With low power consumption (8mA) and up to 3MBaud operation, any USB-UART device can operate efficiently using a USB host controller. Use the narrowest possible bandwidth. The FT230X provides the complete FT-X series feature set, allowing you to quickly and easily add USB to your system design via the UART interface.
  • - Built-in MTP memory, clock generation, AVCC filtering, power-on reset (POR), LDO regulator. - Configurable CBUS I/O pin option - Asynchronous/synchronous bit-bang mode - Operates at +3.3 V and +5.25 V. Nominal operating mode current: 8 mA, Nominal USB susp*** mode current: 125 μA

Spec

  • Quantity:1set(5000pieces)
  • FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip. The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface. They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which ****s to reduce external component count. Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They *** as little bandwidth as possible. The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface. - Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators. - Configurable CBUS I/O Pin Options. - Asynchronous and Synchronous Bit Bang Modes. - Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB susp*** mode current of 125 μA.
  • CODE No.:923-1613

Related product recommendations

You may also be interested in the following products

63-4818-38 RS Green Plastic Stackable Storage Bin, 130mm x 150mm x 240mm 484-4040
Electronic/Electrical Parts and Controll Equipments
63-6900-11 RS PRO 500VA Isolation Transformer, 0 → 230 → 400V ac Primary, 4 x 0-55-60V ac Secondary 123-5703
Electronic/Electrical Parts and Controll Equipments
63-6661-97 RS PRO Drive Belt, belt section B, 1.09m Length 471-966
Electronic/Electrical Parts and Controll Equipments
63-8205-92 RS PRO 12mm Steel Spring Clip 175-3578
Electronic/Electrical Parts and Controll Equipments