Electronic/Electrical Parts and Controll Equipments
63-7726-28 TRACOPOWER TEP 100 100W Isolated DC-DC Converter Through Hole, Voltage in 18 → 36 V dc, Voltage out 12V dc TEP 100-2412
Product Description
Product Model: 63-7726-28Product Brand: TRACOPOWER Feat […]
Contact Us
Product Details
Product Model: 63-7726-28
Product Brand: TRACOPOWER
Features
- UL 60950-1, IEC 60950-1, EN 60950-1. MTBF to MIL-HDBK-217F (25°C) ,Derate above 60°C For suitable common mode chokes: TEP 100-12xx and TEP 10-24xx : see stock number ; 745-1228 745-1228 (L1 and L2) TEP 100-48xx : see stock number ; 745-1212 745-1212 (L1) and stock number ; 745-1225 745-1225 (L2). 3. Traco 100W Single Output Regulated Isolated DC-DC Converter - TEP-100 Series. 100W single output regulated isolated high performance PCB mount dc-dc converter modules in a rugged, sealed metal case with four threaded M3 inserts for attachment of a heatsink (see ; 706-6420 706-6420 for suitable heatsink). This single output high performance PCB mount dc-dc converter modules have a high efficiency allowing an operating temperature up to +60°C with natural convection cooling without power derating, output voltage trimming and remote On/Off. Wide 2:1 input voltage range Soft start Remote On/Off Output current limitation Input protection filter Under voltage lockout Reverse input voltage protection Over temperature, over voltage and short circuit protection
Spec
- Quantity:1piece
- Output Voltage : 12V dc
- Input Voltage Range : 18 → 36 V dc
- Input Voltage Nominal : 24 V dc
- Isolation Voltage : 2.25kV
- Power Rating : 100W
- Output Current : 8.4A
- Mounting Type : Through Hole
- Number of Outputs : 1
- Medical Approved : No
- Railway Approved : Yes
- Package : 1/2 Brick
- Minimum Temperature : -40°C
- Maximum Temperature : +75°C
- Depth : 12.7mm
- CODE No.:706-6417
Related product recommendations
You may also be interested in the following products
63-8350-61 Phoenix Contact SPT-SMD 1.5/ 2-V-5.08 R24, 2 Way PCB Terminal Strip 1824417
model: 63-8350-61
brand: Phoenix Contact
63-7659-47 Dormer 38 mm Solid Carbide End Mill, 6mm Cut Length, 2mm Cut Diameter, 4 Flutes S9042.0
model: 63-7659-47
brand: Dormer
63-7736-50 RS PRO 470μF 16V dc Aluminium Electrolytic Capacitor, Through Hole 10 (Dia.) x 12mm +105°C 10mm 5mm 12mm 170-1172
model: 63-7736-50
brand: RS PRO
63-8029-68 Microchip PIC12F683-E/SN, 8bit PIC Microcontroller, 20MHz, 3.5 kB Flash, 8-Pin SOIC PIC12F683-E/SN
model: 63-8029-68
brand: Microchip