Spec

• Size (Type): 8.3
• Material: Adhesive Surface/Silicon Film, Outside/PET
• Thickness: Approximately 0.2 mm
• Size: W131.6 x D0.2 x H192.1mm
• Weight: 8 g
• Touch panel support: Yes
• Transmittance: 90%
• Haze: 5%±2%
• Surface hardness (H): 2H or more
• *JIS K5600 test
• Load: 750 g
• Antibacterial: Yes
• Uses FUJIFILM Hydro Ag+ VIRUS PLUS film
• Quantity: 1 sheet
• Antibacterial performance: Antibacterial activity value 6.1
• Adhesive Force (N/25mm): 0.03 * JIS Z0237 Compliant
• Adher*** PET film: 25 μm
• Peeling speed: 300 mm/min
• Peeling Angle: 180 Degrees (Folding on Adher*** Side)
• Contact Angle: Purified Water/67.5±7.5°
• Oleic Acid/5.0±1.0°
• Chemical Resistance: Sodium Hypochlorite Resistance (300ppm)/Friction 200 Times/No Appearance/Antibacterial/Antiviral Performance Deterioration
• Alcohol Resistance (80% Ethanol)/Friction 200 Times/No Deterioration in Appearance/Antibacterial/Antiviral Performance
• Wiping Resistance: Dry Wipe, Wipe 5000 Times Each/No Appearance, Antibacterial, Antiviral Performance Deterioration
• Durability: equivalent to 9 years outdoors, cycle thermo heating, flash light test/No deterioration in appearance, antibacterial, antiviral performance
• *The above are measured values, not guaranteed values.
• *The film is antibacterial and antiviral glossy type.
• *Performance other than adhesive strength is the result of testing without adhesive layer and HC film alone.