laboratoryinstruments
4-786-01-22 Cool Incubator (High Precision Model) 106L With Pre-Shipment Inspection Certificate CIH-106
Product Description
Product Model: 4-786-01-22Product Brand: AS ONE Corpora […]
Contact Us
Product Details
Product Model: 4-786-01-22
Product Brand: AS ONE Corporation
Features
- High-precision control is achieved over a wide range of -20 to +60 degrees Celsius.
- Based on the KMH series, this is an advanced model with higher temperature control accuracy.
- In addition to the eight-step program (two patterns), it is possible to switch between energy-saving and high-control operation modes.
- The uniform temperature of the wind blows from both sides of the chamber, making it less susceptible to the volume and shape of the contents.
Spec
- Capacity (L): 106
- Inner dimensions (mm): 620 x 315 x 584
- Outer dimensions (mm): 700 x 502 (602) x 1107
- Material: Exterior/Plastic baked paint steel sheet, Interior/Stainless steel sheet
- Temperature settings range: 20 to + 60 °C
- Compressor output: 300W
- Refrigerant: R -404 A
- Circulation method: Side duct (Callout) ⇒ Top back (suction)
- Frost removal method: Heater defrost method (microcomputer control)
- Function: 8 steps, 2 patterns
- Alarm function: door alarm, temperature abnormality, sensor abnormality, over rise prevention, earth leakage breaker
- Operation mode: EC Mode/HC Mode
- Power supply: AC100V/50/60Hz/15 A
- Power cord length: 3 m
- Power supply plug : 3P plug with ground (L)
- Maximum Power Consumption (50/60Hz): 630/660
- Weight: about 84kg
- Number of shelf board: 2 pieces
- Internal lighting: fluorescent lamps 15W
- Leg part: Free caster, adjustable feet included
- Measurement hole: φ40mm, silicone rubber plug
- Accessories: Inspection and inspection documents
- *Products with inspection certificate is a service to issue inspection certificate after inspection by control and electric engineer at the time of shipment.
- *IQ/OQ service is available for a fee.
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
1-5997-01 Tube Cartridge Small (For Shinetsu Silicone & Momentive) CS-170CT
model: 1-5997-01
brand: Musashi engineering CO., LTD.
laboratoryinstruments
1-7393-01 ［Discontinued］Pipette Stand 3115000.003 3115000003
model: 1-7393-01
brand: Eppendorf AG
laboratoryinstruments
65-0567-76 Maximum flow rate of hot water circulator: 22.5 L/min HS-1100V
model: 65-0567-76
brand: TOKYO RIKAKIKAI CO., LTD.
laboratoryinstruments
63-7074-37 ［Discontinued］EM Paint Stirring Mixer PC φ 80 S -11 φ 80 1315678
model: 63-7074-37
brand: TAKAGI