Electronic/Electrical Parts and Controll Equipments
63-7566-57 Flightlink Controls Brushed DC Motor, 94 W, 22.5 V dc, 30 Ncm, 3000 rpm, 6mm Shaft Diameter 5203
model:
63-7566-57
brand:
Flightlink Controls
Product Description
Product Model: 63-7566-57Product Brand: Flightlink Cont […]
Contact Us
Product Details
Product Model: 63-7566-57
Product Brand: Flightlink Controls
Features
- 32 W → 243 W. Flat design Long life when operating with highest nominal values High performance-to-weight ratio Very smooth operation at low speeds Good acceleration from idle state when fully loaded Low inductance Minimal brush sparking Minimal radio interference Various magnet materials: M type with ferrite magnets; N type with "rare earth magnets" The N type delivers up to 2.5 times the performance and 3 times the torque of an M-type motor of the same size. These powerful pancake motors offer numerous additional advantages compared with conventional permanent magnet DC motors:
Spec
- Quantity:1piece
- Supply Voltage : 22.5 V dc
- DC Motor Type : Brushed
- Power Rating : 94 W
- Output Speed : 3000 rpm
- Shaft Diameter : 6mm
- Maximum Output Torque : 30 Ncm
- Length : 37.7mm
- Dimensions : 120 (Dia.) x 37.7 mm
- Current Rating : 6.9 A
- CODE No.:472-1284
Related product recommendations
You may also be interested in the following products
Electronic/Electrical Parts and Controll Equipments
63-4723-86 TE Connectivity 4.7kΩ 3W Wirewound Resistor ±5% 0 → +60ppm/°C ER744K7JT
model: 63-4723-86
brand: TE Connectivity
Electronic/Electrical Parts and Controll Equipments
63-5043-03 Nichicon 470μF 16V dc Aluminium Electrolytic Capacitor, Through Hole 8 (Dia.) x 11.5mm +105°C 8mm 3.5mm UVY1C471MPD
model: 63-5043-03
brand: NICHICON
Electronic/Electrical Parts and Controll Equipments
63-7449-98 Lumberg Automation M12 Cable Mount Connector, 5 contacts Socket RKC 5/7
model: 63-7449-98
brand: Lumberg Automation
Electronic/Electrical Parts and Controll Equipments