Analyzer, Testing Equipment
61-6985-03 ［Discontinued］Automatic Rotation Stage Φ40mm 19.6N (2.0kgf) SGSP-40YAW
Product Description
Product Model: 61-6985-03Product Brand: SIGMAKOKI CO., […]
Contact Us
Product Details
Product Model: 61-6985-03
Product Brand: SIGMAKOKI CO., LTD.
Features
- It is a rotating stage driven by a stepping motor using bearings for the guide and worm gears for the feed mechanism.
- Automatic stage suitable for positioning for measurement, inspection and evaluation equipment.
- In the automatic rotation stage, the CW limit sensor is ***d as the origin sensor to return to the origin.
- The origin detection is adjusted so that it stops at 0 degrees when the origin return operation is performed using the MINI method at half-step.
- * Caution is required when using the product in reverse direction or on a vertical surface.
- * Accuracy and load capacity may not meet some specifications dep***ing on the mounting direction.
Spec
-
[
Common specification]
- Motor type: 5 phase stepping motor 0.66 A/phase (Tamagawa Seiki (Co., Ltd.))
- Motor product number: TS3664N4 (□24mm)
- Motor step angle: 0.72°
- Sensor power voltage: DC5 - 24V±10%
- Sensor power consumption: 15mA or less
- Sensor control output: NPN open collector output DC 30V or less 50mA or less
- Sensor output logic: When shading > Output transistor OFF (non-conducting)
- Compatible driver: SG-5M, SG-5MA, SG-55M, SG-55MA, SG-514MSC, SG-5151, KR-525M
- Compatible controller: PAT-001, GSC-01, SHOT-102, GSC-02, SHOT-702, GIP-101, SHOT-302GS, SHOT-304GS, HIT-M・HIT-S
- [Individual specification]
- Rotation range: In counter Clockwise CCW direction, at ∞, In clockwise CW direction near at 0 degree (? 2.5°), it stops
- Table surface size: φ40mm
- Transfer mechanism (reduction ratio): Worm gear (1: 144)
- Movement guide: Bearing system
- Stage material: Aluminum, aluminum bronze
- Mass: 0.35kg
- Resolution (full): 0.005°/Pulse
- Resolution (half): 0.0025°/Pulse
- Max speed: 30°/sec
- Positioning accuracy: 0.1°
- Repeatable positioning accuracy: 0.02°
- Withstand load: 19.6N (2.0kgf)
- Moment stiffness: 2″/N・cm
- Lost motion: 0.05°
- Backlash: 0.1°
- Parallelism: 50μm
- Concentricity: 30μm
- Wobble: 0.02mm
- Sensor product number: Microphoto sensor: PM-F24 (SUNX Co., Ltd.)
- Limit sensors: Is available (NORMAL CLOSE)
- Origin sensor: No
- Proximity origin sensor: No
- CE conform product
- RoHS conform product
Related product recommendations
You may also be interested in the following products
Analyzer, Testing Equipment
62-8487-37 Anti-Epidermal Growth Factor Receptor (Ab-5) Mo*** mAb (EGFR.1) GR15L-100UG
model: 62-8487-37
brand: CBC（Merck）
Analyzer, Testing Equipment
61-0256-84 Millistak+(R) Pod F0HC 0.55 M2 Flatseal1P 1ST MF0HC05FS1
model: 61-0256-84
brand: Merck Millipore Corporation
Analyzer, Testing Equipment
61-0369-44 ［Discontinued］1-Bromo-4-Chlorobenzene for Synthesis 821969 5G 8.21969.0005
model: 61-0369-44
brand: Merck Millipore Corporation
Analyzer, Testing Equipment
61-0321-45 Sodium Standard Solution Traceable for SRM Of NIST, (Nano3 in HNO3 0.5 Mol/L), 1000mg/L Na Certipur(R) 170238 100mL 1.70238.0100
model: 61-0321-45
brand: Merck Millipore Corporation