Analyzer, Testing Equipment
61-0250-43 [Discontinued]OPTICAP XLT 20 DURAPORE 20" 0.22μm 1ST KVGLA2ZTT1
Product Description
Product Model: 61-0250-43Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0250-43
Product Brand: Merck Millipore Corporation
Spec
- Filter bore diameter, μm: 0.22
- Length, Inch (cm): 20 (50)
- Support material: Polypropylene
- Seal material: Silicone
- Device material: Polypropylene
- Vent cap material: Polypropylene
- Material: Hydrophilic PVDF
- Housing: Polypropylene
- Filter brand name: Durapore(R)
- Brand name: Opticap
- Main application: Laboratory Filtration
- Form: Capsule
- Maximum Inlet Pressure (psig): 80
- Maximum Inlet Temperature, °C: 25
- T-line/Gauge Port: T-line with 3/4 in. Gauge Port T-line side
- Wettability: Hydrophilic
- Sterility: No sterilization
-
Total extract: The extractables level was equal to or less than 50
mg per capsule after 24
hours in water at controlled room temperature. - Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 2L
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
4-3910-01 UV-visible Spectrophotometer (wavelength Scan Type) ASUV-SP3
model: 4-3910-01
brand: AS ONE Corporation
61-0389-34 [Discontinued]Fmoc-Asp(OtBU)-Ser(Ψme,Mepro)-OH 852186 1G 8521860001
model: 61-0389-34
brand: Merck Millipore Corporation
61-0296-24 Potassium Chloride for Analysis (<= 0.005% Br) Emsure(TM) ACS, ISO, Reag. pH Eur 104933 500G 1.04933.0500
model: 61-0296-24
brand: Merck Millipore Corporation