Electronic/Electrical Parts and Controll Equipments
63-7350-67 TRACOPOWER TEN 15WI 15W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out 12V dc TEN 15-2412WI
Product Description
Product Model: 63-7350-67Product Brand: TRACOPOWER Feat […]
Contact Us
Product Details
Product Model: 63-7350-67
Product Brand: TRACOPOWER
Features
- UL 60950-1, EN 60950-1, IEC 60950-1 (Compliance up to 60 Vdc input voltage, SELV limit). CSA File No. 226037. Derate 3.5% per °C, above 70°C. For suitable heatsink see stock number ; 745-1240 745-1240. 3. Traco 15W Output Regulated Isolated DC-DC Converter - TEN15WI Series. 15W single/dual output regulated isolated DC-DC converters with SMD design, ceramic chip capacitors for high reliability and an ext***ed temperature range of -40°C to +85°C. Typical applications for these DC-DC converters include communications, industrial systems and battery powered equipment. Products not recomm***ed for new designs please refer to the alternative at the bottom of the page 51x25x10 mm metal package Ultra-wide 4:1 input voltage range Very high efficiency up to 86% 1.5kV input / output isolation Built-in filter meets EN 55022, Class A and FCC,Level A without external components Remote On/Off Control Continuous short circuit protection Shielded metal case with insulated baseplate Industry standard pin-out
Spec
- Quantity:1set(10pieces)
- Output Voltage : 12V dc
- Input Voltage Range : 9 → 36 V dc
- Input Voltage Nominal : 24 V dc
- Isolation Voltage : 1.5kV dc
- Power Rating : 15W
- Output Current : 1.25A
- Mounting Type : Through Hole
- Number of Outputs : 1
- Minimum Temperature : -40°C
- Maximum Temperature : +85°C
- Series : TEN 15WI
- CODE No.:166-5572
Related product recommendations
You may also be interested in the following products
64-0634-38 Nexperia 74HC1G04GW,125 CMOS Inverter, 5-Pin TSSOP 74HC1G04GW,125
model: 64-0634-38
brand: Nexperia
63-8406-62 DMP2035UFDF-7 P-Channel MOSFET, 20 V, 6-Pin DFN2020 Diodes Inc DMP2035UFDF-7
model: 63-8406-62
brand: DiodesZetex
63-7582-92 Bosch Rexroth Linear Ball Bearing R060202510 R060202510
model: 63-7582-92
brand: Bosch Rexroth
64-0431-89 Dormer 92 mm HSS-E-PM End Mill, 32mm Cut Length, 5/8in Cut Diameter, 4 Flutes C2475/8
model: 64-0431-89
brand: Dormer