![61-0227-80 [Discontinued]Vitipore II Cart Filt 30In. 0.65μm Code 0 1/Pk 1ST CVBY03PK1](https://www.jgauge.com/wp-content/uploads/2025/08/52c66f97e69ec143ddeef085365e4c0a.webp)
Analyzer, Testing Equipment
61-0227-80 [Discontinued]Vitipore II Cart Filt 30In. 0.65μm Code 0 1/Pk 1ST CVBY03PK1
Product Description
Product Model: 61-0227-80Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0227-80
Product Brand: Merck Millipore Corporation
Spec
-
Filtration area, m
2
: 2.34 - Filter bore diameter, μm: 0.65
- Diameter, cm (inch): 6.9 (2.7)
- Length, Inch (cm): 30 (75)
- Support material: Polypropylene
- Seal material: Silicone
- Device material: Polypropylene
- Material: Hydrophilic PVDF
- Code: Code 0
- Filter brand name: Durapore(R)
- Brand name: Vitipore
- Main application: Food and Beverage;Beer;Bottled Water;Wine
- Form: Cartridge
- Quantity/box: 1
- Overview: Vitipore II cartridge filter 30 in. 0.65μm code 0
- Product name: Vitipore II cartridge filter
-
Air diffusion flow rate, 23 °C:
27.3mL/min @ 620 mbar (9 psig) in water - Cartridge code: Code 0 (2-222) O-ring
-
Bubble point, 23 °C:
96.5kPa (14 psig) air with water - Maximum input pressure, kPa (psi): Forward - 5.5 (80) @ 25℃; 1.7 (25) @ 80℃; 0.35 (5) @ 109℃. reverse - 1.7 (25) @ 25℃, intermittent
- Maximum differential pressure, kPa (psid): Forward - 552 (80) @ 25℃; 172 (25) @ 80℃; 34 (5) @ 109℃. reverse - 172 (25) @ 25℃, intermittent
- Wettability: Hydrophilic
- Sterilization: SIP of 109° for 30 minutes, 100 times; hot water sterilization of 80° for 30 minutes, 50 times maximum
-
Total extract: The extractables level was equal to or less than 23
mg per 10-inch cartridge after 24
hours in water at controlled room temperature. - ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
62-8485-62 Tumor Necrosis Factor-alpha, recombinant human; 50 μg GF023
model: 62-8485-62
brand: Sigma Aldrich Japan(Millipore)
61-0334-97 Divinylbenzene (Stabilizer:4-Tert-Butylpyrocatechol) for Synthesis 803598 250mL 8.03598.0250
model: 61-0334-97
brand: Merck Millipore Corporation
65-0579-56 5 flask covers (for 250 mL): GL 14 x 1 + NS 14/23 x 3 + Rodaviss 24 x 1
model: 65-0579-56
brand: TOKYO RIKAKIKAI CO., LTD.
61-0341-13 Thiophene for Synthesis 808157 250mL 8.08157.0250
model: 61-0341-13
brand: Merck Millipore Corporation