Electronic/Electrical Parts and Controll Equipments
63-6833-09 Pin Contact HR30 Series Male Crimp Terminal Signal 1 Bag (100 pcs) HR30-PC-111
Product Description
Product Model: 63-6833-09Product Brand: Hirose Features […]
Contact Us
Product Details
Product Model: 63-6833-09
Product Brand: Hirose
Features
- Crimp contacts (part numbers 537-5400 and 537-5416) must be ordered separately for 26~30AWG wires up to an overall diameter of 1 mm.
- Waterproof Miniature Plastic Connector
- The Hirose Electric HR30 lightweight waterproof connector has IP67 waterproofing performance and does not allow water to enter even when left at a depth of 1 m for 30 minutes. All connectors are made from fiberglass reinforced thermoplastic composites and non-corrosive materials. The solder pot inner diameters of the solder terminal connectors are 3 poles (1.1 mm), 6 poles (0.8 mm), and 12 poles (0.6 mm).
- Push-pull lock mechanism Small, lightweight, polarizing to prevent contact misengagement Built-in Cable strain relief High durability that can withstand 1000 insertions and removals
Spec
- Quantity: 1 Bag (100 Pieces)
- Male/Female: Male
- Cable size: 30 to 26 AWG
- Terminal methods: crimping
- Series: HR30
- Rated current: 2 A
- Length: 11 mm
- Contact Plating: Gold
- Contact Material: Copper Phosphate
- Operating temperature Min: -25°C
- Operating temperature Max: +85°C
- installation types: Cable mount
- RoHS Compliance Status: Compliance
- Securities Code: 122-4348
Related product recommendations
You may also be interested in the following products
63-6697-16 Clear Passivated, Zinc Steel Hex M12 x 60mm Set Screw 530-208
model: 63-6697-16
brand: RS PRO
63-6663-65 Thin-film Chip Resistor 1608 size 0.063 W 4.75 kohm +/- 0.1% RN73C1J4K75B
model: 63-6663-65
brand: TE Connectivity
63-4891-68 TDK VLCF Series Shielded Wire-wound SMD Inductor 2.2 μH ±30% Wire-Wound 2.76A Idc VLCF5020T-2R2N2R6-1
model: 63-4891-68
brand: TDK