
Analyzer, Testing Equipment
64-1193-07 PTFE Filter Paper PF-100 25mm 20 pcs 38A01025
Product Description
Product Model: 64-1193-07Product Brand: ADVANTEC Featur […]
Contact Us
Product Details
Product Model: 64-1193-07
Product Brand: ADVANTEC
Features
- It can be ***d continuously and stably in the temperature range of -120 to 260°C. Autoclave sterilization, dry heat sterilization and ethylene oxide gas sterilization are also possible.
- It has excellent chemical resistance that is not affected by acids, alkalis, oxidants, organic solvents, etc., and can be ***d for most chemicals other than special chemicals such as fluorine gas, chlorine trifluoride, and molten alkali metals at high temperatures and pressures.
- Due to its hydrophobic nature (repelling water), it is not easily affected by humidity in gas filtration, and there is little adsorption of acidic gases.
- Since the filter is specially treated at the time of manufacturing, there are almost no fibers leaving the filter.
- After filtration, the filter can be washed with chemicals for repeated ***.
- Beca*** of its low friction coefficient and other characteristics such as electrical properties, non-adhesion, and mold release, the residue on the filter after filtration can be recovered more easily than cellulose filter paper.
- It is ***d for high-viscosity organic solvent-based filtration, pre-filtering when there are a lot of susp***ed solids, and collecting airborne particulate matter in the air.
Spec
- Dimensions ( mm ) : 25
- Mass (g/m ^ 2): 500
- Thickness (mm): 1.00
- Porosity (%): 77
- Pressure drop (kPa): 0.059
- Collection efficiency (0.3 μm DOP%): 70.0
- Retained particle size (μm): 10
- Water repellency (kPa): > 3.9
- *Pressure drop ・・・ value at a ventilation rate of 5 cm/s.
- *Collection Efficiency ・・・ 0.3 Collection efficiency when air containing dispersed dioctyl μm phthalate particles is filtered through an aeration rate of 5 cm/s.
- *Retained particle size ・・・ Standard particles in methyl alcohol, determined by capture particle size when filtered at a filtration rate of 1.0 kL/h m ^ 2.
- *Water Repellency ・・・ Pressure required for water to pass through.
Related product recommendations
You may also be interested in the following products
61-6905-59 Biconvex Lens BK7 φ25mm Focal Length 26.5mm SLB-25B-25P
model: 61-6905-59
brand: SIGMAKOKI CO., LTD.
62-8494-01 Anti-KRIT-1, clone 15; 100 μg MAB2630
model: 62-8494-01
brand: Sigma Aldrich Japan(Millipore)
62-8516-56 Anti-PSD95, clone K28/43; 100 μg MABN68
model: 62-8516-56
brand: Sigma Aldrich Japan(Millipore)
61-0374-09 4-(2'-Pyridylazo)-Resorcinol for Synthesis 841016 5G 8.41016.0005
model: 61-0374-09
brand: Merck Millipore Corporation