64-1192-55 PTFE Filter Paper PF-020 400mm x 1 m 38204400
Analyzer, Testing Equipment

64-1192-55 PTFE Filter Paper PF-020 400mm x 1 m 38204400

model: 64-1192-55
brand: ADVANTEC

Product Description

Product Model: 64-1192-55Product Brand: ADVANTEC Featur […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 64-1192-55
Product Brand: ADVANTEC

Features

  • It can be ***d continuously and stably in the temperature range of -120 to 260°C. Autoclave sterilization, dry heat sterilization and ethylene oxide gas sterilization are also possible.
  • It has excellent chemical resistance that is not affected by acids, alkalis, oxidants, organic solvents, etc., and can be ***d for most chemicals other than special chemicals such as fluorine gas, chlorine trifluoride, and molten alkali metals at high temperatures and pressures.
  • Due to its hydrophobic nature (repelling water), it is not easily affected by humidity in gas filtration, and there is little adsorption of acidic gases.
  • Since the filter is specially treated at the time of manufacturing, there are almost no fibers leaving the filter.
  • After filtration, the filter can be washed with chemicals for repeated ***.
  • Beca*** of its low friction coefficient and other characteristics such as electrical properties, non-adhesion, and mold release, the residue on the filter after filtration can be recovered more easily than cellulose filter paper.

Spec

  • Dimensions: 400 mm x 1 m
  • Mass (g/m ^ 2): 500
  • Thickness (mm): 0.54
  • Porosity (%): 54
  • Pressure drop (kPa): 1.6
  • Collection efficiency (0.3 μm DOP%): 99.9
  • Retained particle size (μm): 2
  • Water repellency (kPa): > 14.7
  • *Pressure drop ・・・ value at a ventilation rate of 5 cm/s.
  • *Collection Efficiency ・・・ 0.3 Collection efficiency when air containing dispersed dioctyl μm phthalate particles is filtered through an aeration rate of 5 cm/s.
  • *Retained particle size ・・・ Standard particles in methyl alcohol, determined by capture particle size when filtered at a filtration rate of 1.0 kL/h m ^ 2.
  • *Water Repellency ・・・ Pressure required for water to pass through.

Related product recommendations

You may also be interested in the following products

61-0252-28 Opticap XL2 Milligard LPB LPB 0.2μm 3/4In. TC/TC 3/Pk 3 x 1ST KWL3A02FF3
Analyzer, Testing Equipment
61-0193-73 Support Screen 90mm SS 1/Pk 1PK YY2209064
Analyzer, Testing Equipment

61-0193-73 Support Screen 90mm SS 1/Pk 1PK YY2209064

model: 61-0193-73 brand: Merck Millipore Corporation
61-9063-88 Standard Fluorescence Cell F10-UV-1 6210-17001
Analyzer, Testing Equipment