63-6729-97 RS PRO Blow Gun Dust Bag Kit, 6bar 806-785
Electronic/Electrical Parts and Controll Equipments

63-6729-97 RS PRO Blow Gun Dust Bag Kit, 6bar 806-785

model: 63-6729-97
brand: RS PRO

Product Description

Product Model: 63-6729-97Product Brand: RS PRO Features […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 63-6729-97
Product Brand: RS PRO

Features

  • Use only this type of unconstrained blowgun on an insufflation line where the pressure regulator is configured at a maximum of 30 psi.
  • To prevent injury, always *** this gun with a dust bag or conveyor hose. Wear approved safety glasses when using this tool. Blogger can be dangerous if not ***d properly, so read the instruction manual carefully.
  • Vacuum gun for deep holes
  • A special type of plastic probe designed for *** in removing dust, debris, and shavings from blind holes up to 18 inches deep. Injecting high-pressure air into the hole through a special type of plastic probe to ensure that small pieces are sucked in by the main nozzle to prevent removal of small pieces from popping out or injuring. The main nozzle has a shroud. 1/4 inch BSP Inlet Maximum Operating Pressure: 6 bar Accessories sold separately.

Spec

  • Type:Dust Bag Kit
  • Working Pressure:6bar
  • Air Inlet BSP:1/4in
  • CODE No.:806-785

Related product recommendations

You may also be interested in the following products

63-4897-01 ON Semi 1000V 1A, Silicon Junction Diode, 2-Pin DO-41 MUR1100ERLG MUR1100ERLG
Electronic/Electrical Parts and Controll Equipments
64-0429-57 ABB 16 A 3P Non-F***d Switch Disconnector 2CMA142417R1000  BWS 316 TPN
Electronic/Electrical Parts and Controll Equipments
64-1281-45 MTCH101T-I/OT Microchip, Capacitive Proximity Detector 6-Pin SOT-23 MTCH101T-I/OT
Electronic/Electrical Parts and Controll Equipments
63-4616-88 RS PRO Green Cat6 Cable, S/FTP, Male RJ45/Male RJ45, Terminated, 500mm 411-362
Electronic/Electrical Parts and Controll Equipments