Features

• NUCLEO-F030R8 Nucleo-64 Development Board. The STM32 Nucleo Board, NUCLEO-F030R8 will work in conjunction with the STM32 F0 series microcontroller to allow you to build your own prototypes for embedded applications. With its easy to use development platform it can offer a quick solution in evaluating and developing with any Arm Cortex™ M processor STM32 F0 32-bit flash microcontrollers in the LQFP64 package. The Nucleo development board connects with the Arduino™ and will support most shields. Also the ST Morpho headers help increase the functionality of the Nucleo open development platform (ODP). The ARM ;sup>® ;/sup> mbed enabled board has an integrated ST-Link/V2 circuit debugger and programmer (SWIM/SWD) and this will interface with the on board STM32F030R8T6 or with a suitable STM32 MCU in your application.. System requirements : Windows PC (XP, Vista, 7, 8)/ USB type A to Mini-B USB cable such as ; 656-3939 656-3939 On board STM32F030R8T6 Microcontroller Extension resources: Arduino Uno Revision 3 connectivity and STMicroelectronics Morpho extension pin headers for full access to all STM32 I/O mbed enabled (mbed.org) On board ST-LINK/V2-1 debugger/programmer with SWD connector Selection mode switch to use the kit as a standalone ST-LINK/V2-1 Power supplies: USB VBUS or external source (3.3V, 5V, 7-12V); Power management access point Three LEDs: USB communication; user LED; power LED User and Reset buttons Interfaces supported on USB: Virtual Com port; Mass storage; Debug port STM32 comprehensive software HAL library Integrated Development Environments (IDEs) support include IAR, Keil, GCC-based IDEs