
Electronic/Electrical Parts and Controll Equipments
63-5075-73 Toggle Switch Bipolar Double Throw (DPDT) On-Off-On ET225P12-Z
model:
63-5075-73
brand:
Copal Electronics
Product Description
Product Model: 63-5075-73Product Brand: Copal Electroni […]
Contact Us
Product Details
Product Model: 63-5075-73
Product Brand: Copal Electronics
Features
- UL, CSA, PSE - Single pole and 2 pole toggle switches only, see table above for details.
- Hardware for fixing panel.
- The temporary states of the 2-pole and 3-pole momentary switches are shown in parentheses as (on) - off - (on).
- For a suitable mating connector to mate with a 0.250 inch tabbed toggle switch, see Part No.; Refer to 669-2374 669-2374.
- Part number; The 762-5384 762-5384 has solder terminals on the side of the switch body, not on the underside of the switch body.
- Fujisocto Glu Switch - ET Series
- The Fujisoku ET Series toggle switches are available in single pole, 2 pole, 3 pole, and 4 pole contact configurations, alternate or momentary switching functions, 0.250 inch tabs, and screw or solder terminal types.
- The EL toggle switch ***s self-extinguishing UL94V-0 phenol resin as the body material, has excellent arc and tracking resistance, and is equipped with a contact mechanism that guarantees high reliability with reduced chattering and bounce times.
- The ET Series toggle switches have a panel mount design and the switch body is mounted on a 12.3 mm diameter cutout (without locking rings). 12.5 mm if lock rings are ***d) and the maximum panel thickness is 5.5 mm.
- The ET Toggle Switch Series includes a variety of toggle switches that can be ***d in many applications requiring high power switching from 3 A to 30 A.
- Compatible accessories for this series include grey, red and black waterproof boots and on/off escutcheon plates. Part No.; 222-948 222-948,; 222-932 222-932,; 222-954 222-954,; 222-910 222-910 and; Refer to 222-926 222-926.
- High rated current -3 A, up to 30 A Solder, screw or 0.250 inch tab terminal Alternate or momentary switching (momentary switching only 2 pole and 3 pole toggle switches) Maximum contact resistance of 30 MΩ for 3 A rated switch (Part number; 398-225 398-225,; 762-5384 762-5384 and; 762-5388 762-5388) Maximum contact resistance of 20 MΩ for all other ET toggle switches Insulation strength: 1500 V ac, minimum 1 minute insulation resistance: 100 MΩ
Spec
- Number of Pieces: 1
- Contact Configuration: Bipolar Double Throw (DPDT)
- Switch Operation: On-Off-On
- Contact current rating: 15 A @ 250 V ac, 25 A @ 125 V ac
- Mounting Type: Panel Mount
- Terminal Type: Solder Tag
- Actuator Length: 17 mm
- Contact resistance: 20 mΩ
- Panel Cutout Size: 12.3 mm
- RoHS Compliance Status: Compliance
- Securities Code: 762-5445
Related product recommendations
You may also be interested in the following products
63-4705-49 Male C14 IEC Filter Panel Mount 5 x 20mm,Faston,Rated At 6A,250 V ac Operating Frequency 50 → 400Hz FN282-6-06
model: 63-4705-49
brand: Schaffner
63-3101-55 D-Sub 25 Pin female Board mounting 3223DB25RS1G1E
model: 63-3101-55
brand: Linkman
63-4699-81 ROHM SHIELD-EVK-001, Sensor Shield for Arduino UNO/Mbed SHIELD-EVK-001
model: 63-4699-81
brand: ROHM
63-4742-99 RS Pro 25 Way Panel Mount Micro-D PCB Connector Plug 244-3768
model: 63-4742-99
brand: RS PRO