toner
61-4426-19 ［Discontinued］Digital Dust Measuring Apparatus LD-3K2 080000-41
Product Description
Product Model: 61-4426-19Product Brand: SIBATA SCIENTIF […]
Contact Us
Product Details
Product Model: 61-4426-19
Product Brand: SIBATA SCIENTIFIC TECHNOLOGY LTD.
Features
- Many our company digital dust meters are ***d to measure susp***ed particulate matter in the working environment. As a relative densitometer using the light scattering method, it has the advantage of obtaining data in a shorter time than the filtration collection method. On the other hand, the relative concentration obtained must be corrected to the mass concentration by determining the mass concentration conversion factor based on the filtration collection method.
- By entering the mass density conversion factor (K value), you can easily convert the count to mass density. Also, since it is equipped with a recording function of measurement data, it is possible to import recorded dust concentration data into a personal computer.
- The function has been improved, but the operation is almost the same as the existing our company digital dust meter, so it can be ***d easily by those who are ***d to those dust meters.
Spec
- Quantity: 1 unit
- Type: LD-3K2 type
- Extension: LD-3K2 type
- Type: LD-3K2 type
- Mass: 1.2kg
- Height (mm): 105
- Width (mm): 185
- Depth (mm): 69
- Measurement range: 0.001 - 10.00mg/m 3
- Power supply: DC12V (AC100V: AC adapter PA-314, DC: Size AA battery x 8 pieces, Nickel hydrogen battery pack)
- Accuracy: +/- 10%
- Ambient temperature range: 0 - 40℃
- Display: Graphic liquid crystal
- Output: USB/RS-232C output, Non-voltage pulse output: Open collector, Voltage output: 0 - 1V
- Light source: Laser diode
- Measurement sensitivity: 1CPM=0.001mg/m3
- Measurement principle: Light scattering type
- Specification: Display contents, measurement value (0 - 99999 counts) 5 digits display
- Measurement time
- Current time
- Measurement mode
- Battery remaining amount
- K value (set values 0.1 - 9.9)
- Bar graph (displayed by pushing a switch during measurement), measurement mode
- Down timer, set measurement time by internal down timer, Measurements are performed. 6 seconds 10 seconds 30 seconds 1 minute 2 minutes 3 minutes 5 minutes 10 minutes (Power introduced initial state is "1 minute" of a down timer mode)
- Manual, measurements are started and stopped by manual.
- Log (logging), measurement day of commencing, Measurement time, Set cycle, Measurement is performed while recording measurement data in the body.
- Span check, by inserting a sensitivity calibration scattering plate and measuring, The value of scattering plate is measured, Correction values are stored.
- BG (background) Measurement is carried out in a state where fills the detection instrument with clean air, BG values are measured and stored. Deducted from the measurement values next time.
- Accessories: Shoulder belt, AC adapter (PA-314), Adapter for tripod, AA size manganese dry cell x 8 pieces, Communication cable with software (USB)
- Traceability: Available
Related product recommendations
You may also be interested in the following products
toner
65-4279-06-20 Normal Pressure Gauge (Φ75) Vertical B Frame for Steam with 0.1 MPa with Inspection Certificate AC20-231
model: 65-4279-06-20
brand: NAGANO KEIKI Co., Ltd.
toner
65-3533-10 ［Out of stock］Temperature Sensor BR Series for Low Temperature with ISO Document Set -100~200°C 100 mm Parallel Flat Driving Wire No E Type BR-01E-0-TS1-ASP
model: 65-3533-10
brand: ANRITSU METER CO., LTD.
toner
67-5576-77 Kh Series Recording Paper Scale Numbers: 0~1200°C 1 Set (15 Books) EH05035
model: 67-5576-77
brand: CHINO CORPORATION
toner
65-3463-25 Sealed Pressure Gauge Type D Vibration-Resistant Pressure Range (MPA): 0~0.1 315-D341X0.1MPA-MV
model: 65-3463-25
brand: Asahi Gauge Manufacturing