Spec

• Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
• Validate (FAT) before shipping.
• After receiving the order, a FAT instruction form (plan) is sent to the ***r, and after the signature is returned, the FAT is performed.
• App***ix: FAT report/Calibration Certificate of ***d measuring instrument copied
• *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
• Temperature point: 1 point of 37 degrees Celsius
• External dimensions (mm): 140 x 150 x 310
• Tank internal dimensions (mm): 194 x 336 x 156
• Type: Water Bath
• Temperature control range: room temperature + 5 ~ 80 degrees C (MAX 70 degrees C when using attached water tank)
• Temperature setting range * 1: -20.0 to + 80.0 degrees C
• Temperature control accuracy * 2: from +/- 0.05 degrees C
• Function
• ON Timer and OFF Timer
• Abnormal Overheat Prevention Device (Thermostat)/Circuit Protector/Float Type Dry Heating Prevention
• Sensors: Thermistors
• Heater capacity: 1 kW (made of stainless steel (SUS 316))
• Stirring mechanism: jet stirring type
• Pump capacity: maximum discharge/10 L/min, maximum head/1.4 m (pump alone)
• Timer setting range: 1 minute to 99 hours (in 1-minute increments)
• Clamp mountable width: 40 mm
• Power: 100 VAC 50/60 Hz (Power consumption: MAX 1.1 kVA)
• Accessories: PP (polypropylene) water tank
• *1 The unit has no cooling function. Use an external (optional) cooling device.
• *2 Performance of the controller alone. Dep***s on conditions of ***.
• *If you would like to request a local IQOQ, please contact us separately. We need your installation address for the estimate.