63-4968-43 Illuminated Push Button Switch, IP40, Panel Mount, Latching for *** with Series 31 -25°C +55°C 31-262.0252
Electronic/Electrical Parts and Controll Equipments

63-4968-43 Illuminated Push Button Switch, IP40, Panel Mount, Latching for *** with Series 31 -25°C +55°C 31-262.0252

model: 63-4968-43
brand: EAO

Product Description

Product Model: 63-4968-43Product Brand: EAO Features EN […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 63-4968-43
Product Brand: EAO

Features

  • EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for *** in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to *** an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11

Spec

  • Quantity:1piece
  • Switch Type : Push Button
  • Switch Operation : Latching
  • IP Rating : IP40
  • For Use With : Series 31
  • Maximum Switching Voltage : 250V ac
  • Mounting Type : Panel Mount
  • Terminal Type : Solder
  • Minimum Operating Temperature : -25°C
  • Maximum Operating Temperature : +55°C
  • Operating Temperature Range : -25 → +55°C
  • CODE No.:690-7033

Related product recommendations

You may also be interested in the following products

63-4973-49 Amphenol RJF Series, Male RJ45 Connector RJF6G
Electronic/Electrical Parts and Controll Equipments
63-4758-54 FCT - A MOLEX COMPANY FM Series Panel Mount, 5 Pin D-sub Connector Plug, Shell Size B Mixed Contact D-Sub FM5W5P-K120
Electronic/Electrical Parts and Controll Equipments
63-4944-38 33kΩ 0805 Thick Film SMD Resistor ±1% 0.125W - CRCW080533K0FKEA CRCW080533K0FKEA
Electronic/Electrical Parts and Controll Equipments