Analyzer, Testing Equipment
62-6180-79 25 mm GD/XP Syringe Filter (PTFE 0.45 μm) 1 Pack (150 Pieces) 6974-2504
Product Description
Product Model: 62-6180-79Product Brand: Cytiva (Whatman […]
Contact Us
Product Details
Product Model: 62-6180-79
Product Brand: Cytiva (Whatman)
Features
- Reduced ion elution level, suitable for inorganic ion analysis
- Two different pore sizes of polypropylene built into the prefilter
- Can also be ***d as a filter with low protein adsorption
- Disposable syringe filter with reduced ion elution level, suitable for inorganic ion analysis. Built-in polypropylene pre-filter with 2 different pore sizes: 20 μm and 5 μm. The membrane of the final filter can be selected according to the application.
- Since polypropylene is ***d for the prefilter, it can also be ***d as a filter with low protein adsorption.
- Note)Only for test and research purposes.
- PTFE= polytetrafluoroethylene
Spec
- Housing Material: Polypropylene (Uncolored)
- Filtration area: 4.6 cm2
- Voltage: 5.2 bar (75psi)
- Residual liquid volume: 1.4 mL before air purge, about 250 μl after air purge
- Dimensions: 20.8 mm x 30.0 mm
- Weight: about 3g
- Flow direction: Sample must be injected from the inlet side.
- Inlet: Female Luer Lock
- outlets: male lures
- Sterilization: Autoclavable. 121°C (max. 131°C), 20 min at 1 bar (15psi)
- Prefilter: PP: 20 μm, 5 μm
Related product recommendations
You may also be interested in the following products
Analyzer, Testing Equipment
61-0247-47 Opticap XL10 Polygard-CN 1.2μm 3/4In. TC/TC 1/Pk 1ST KN12A10FF1
model: 61-0247-47
brand: Merck Millipore Corporation
Analyzer, Testing Equipment
62-8500-09 ［Discontinued］Anti-Plexin B1, clone 19A7.1; 100 μg MAB10402
model: 62-8500-09
brand: Sigma Aldrich Japan(Millipore)
Analyzer, Testing Equipment
62-8373-50 Anti-Protein C, clone GMA-093; 100 μg 05-878
model: 62-8373-50
brand: Sigma Aldrich Japan(Millipore)
Analyzer, Testing Equipment
62-8460-47 Anti-Histone H3.1/H3.2, Cat. No. ABE154 ABE154
model: 62-8460-47
brand: Sigma Aldrich Japan(Millipore)