Analyzer, Testing Equipment
62-6180-31 13 mm GD/X syringe filter (PTFE 0.2 mum) 6874-1302
Product Description
Product Model: 62-6180-31Product Brand: Cytiva (Whatman […]
Contact Us
Product Details
Product Model: 62-6180-31
Product Brand: Cytiva (Whatman)
Features
- Difficult to clog compared to standard syringe filters and can filter up to 3~7 times as much - 3 layer prefilter efficiently removes unwanted particles - Whatman GMF150 (double layer structure) and GF/F prefilter prevent clogging - Syringe filter developed for filtration of solutions containing many susp***ed particles.
- GMF150 (double layer structure) and GF/F of glass fiber filter paper are built in as prefilters. With this prefilter, GD/X can filter samples that would otherwise be difficult to filter with conventional filters, without worrying about contamination, just by applying light pressure by hand.
- Note: For research purposes only.
- Beca*** PTFE is a hydrophobic membrane, it must be prewetted with methanol before filtering an aqueous solution.
- PTFE= Polytetrafluoroethylene
Spec
- Housing Material: Polypropylene (Uncolored)
- Filtration area: 1.3 cm2
- Voltage: 100 psi (6.9 bar)
- Residual fluid: 0.5 mL before air purging, about 50 mul after air purging
- Dimensions: 21.6 mm x 29.8 mm
- Weight: About 3g
- Flow direction: Samples should be injected from the inlet side.
- Inlet: Female Luer Lock
- Outlets: Male lures
- Sterilization: Autoclavable. 20 minutes at 121 degrees C and 15 psi
- Glass fiber: 100% borosilicate
- Prefilter: GMF 150 (10 micrometer: 1 micrometer), GF/F (0.7 micrometer)
- Note)The borosilicate glass fibers in the prefilter are physically and chemically stable, but alkaline components can elute in the aqueous solution. pH-sensitive biological samples can be affected by the elution of trace amounts of alkaline components.
Related product recommendations
You may also be interested in the following products
Analyzer, Testing Equipment
61-0229-70 Milligard Cart Filt 20In. Code 0 0.5/0.2μm 3/Pk 3 x 1ST CWSS02S03
model: 61-0229-70
brand: Merck Millipore Corporation
Analyzer, Testing Equipment
62-8373-57 Anti-phospho-STAT5A/B (Tyr694/699), clone 94-10C-9-10C-2; 100 μL 05-886R
model: 62-8373-57
brand: Sigma Aldrich Japan(Millipore)
Analyzer, Testing Equipment
61-0228-72 Durapore Cart Filt 20In. 1.2+0.5+0.22μm Code 0 3/Pk 3 x 1ST CVSC02TP3
model: 61-0228-72
brand: Merck Millipore Corporation
Analyzer, Testing Equipment
62-8485-39 ［Discontinued］Milli-Mark(R) Anti-HDAC2-PE, clone 3F3 FCMAB423PE
model: 62-8485-39
brand: Sigma Aldrich Japan(Millipore)