Spec

• [
  
  Common specification]
  
• Motor type: 5 phase stepping motor 0.75A/phase (Tamagawa Seiki (Co., Ltd.))
• Motor product number: TS3664N4E10 (□24mm)
• Motor step angle: 0.72°
• Sensor power voltage: DC5 - 24V±10%
• Sensor power consumption: 60mA or less (20mA or less per 1 sensor)
• Sensor control output: NPN open collector output DC 30V or less 50mA or less
• Sensor output logic: When shading: Output transistor OFF (non-conducting)
• Compatible driver: SG-5M, SG-5MA, SG-55M, SG-55MA, SG-514MSC, MC-7514PCL
• Compatible controller: GSC-01, GSC-02, SHOT-702, GIP-101, SHOT-302GS, SHOT-304GS, HIT-M・HIT-S, PGC-04
• [Individual specification]
• Movement amount: 35mm
• Table surface size: 85 x 85mm
• Feed crew: Ball screw diameter φ6mm, Lead 1mm
• Movement guide: Outer rail structure
• Stage top side material: Aluminum
• Surface treatment: Black anodic oxide
• Mass: 1.1kg
• Resolution (full): 2μm/Pulse
• Resolution (half): 1μm/pulse
• Max speed: 25mm/sec
• Positioning accuracy: 5μm
• Repeatable positioning accuracy: 3μm
• Withstand load: 78.4N (8.0kgf)
• Moment rigidity/pitch: 0.4″/N・cm
• Moment rigidity/yaw: 0.25″/N・cm
• Moment rigidity/roll: 0.25″/N・cm
• Lost motion: 3μm
• Backlash: 3μm
• Parallelism: 30μm
• Running parallelism: 10μm
• Pitching: 30″
• Yawing: 20″
• Sensor product number: Microphoto sensor: GP1S092HCPIF (Sharp Corporation)
• Limit sensors: Is available (NORMAL CLOSE)
• Origin sensor: Is available
• Proximity origin sensor: No
• CE conform product
• RoHS conform product