Features

• This Z-axis stage ***s the principle of leverage to transfer horizontal micrometer operations to vertical movement.
• Since it moves in contact with the R groove of the guide by 4 points of the steel ball, it is stable in all directions and can adjust the height with high accuracy.
• Table faces that you move up and down will move more smoothly and horizontally.
• Stainless steel type (TSDS) is available for vacuum applications.
• Products with FP at the *** of the part number *** fine pitch screws.
• Please **** that this is not an ordinary micrometer head.
• When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
• * Due to its structure, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and *** the stage in the direction of the reverse direction.
• * Due to the structure applying the principle of leverage, there is a deviation (about ±0.02 mm per 0.5 mm/1 rotation of the micrometer head) in the feed amount relative to the scale dep***ing on the position of the moving amount.