Analyzer, Testing Equipment
61-6960-57 Desktop Anti-Vibration Unit (Horizontal Level Automatic Type) DT-4048A-A
Product Description
Product Model: 61-6960-57Product Brand: SIGMAKOKI CO., […]
Contact Us
Product Details
Product Model: 61-6960-57
Product Brand: SIGMAKOKI CO., LTD.
Features
- This table top type vibration isolator can be ***d only on a table, laboratory table, etc., and is effective for space saving, small optical systems, microscopic observation systems, etc.
- It is a vibration isolator that quickly attenuates vibration that is transmitted to the equipment and devices to be installed. It is indispensable as a mounting platform for equipment and devices that do not like the effect of vibration.
- Vertical vibration isolation is performed by the precision air spring system.
- The integral outer frame has excellent rigidity.
- Also, since the mounting board is enclosed with a frame around the outer circumference, there is almost no effect on the mounting board if it accidentally comes in contact with the outer circumference frame during work.
- A quiet type silent compressor (PC-10H-S) that can be ***d indoors is available when the compressor is installed in a place where there is no air source.
- The watch may not function properly if it is loaded with an extremely biased load or equipment or equipment with an abnormally high center of gravity.
Spec
-
[
common specification]
- Natural frequency (vertical direction): About 2.0 - 2.3Hz
- Vibration prevention (vertical direction): Precision air spring
- Control method: Air damping by orifice
- Mounting plate ***d (part number suffix A): Lonleum*bonded to steel plate (non-magnetic)
- Mounting plate ***d (part number suffix B): Steel plate black finish (magnetic)
- Mounting plate ***d (part number suffix C): Upper plate: Magnetic Stainless Steel plate, thickness 5mm (unpainted), lower plate: Aluminum
- Mounting plate ***d (part number suffix D): M6 tapped holes on 25 x 25mm matrix over the entire top surface of type C above
- Mounting plate ***d (part number suffix E): M6 tapped holes on 25 x 25mm matrix over the entire top surface of type C above
- Features: Equipped with an auto level sensor, if the vertical balance of the mounting plate is disturbed due to a shifting load, it automatically restores to the set height.
- Air supply: Automatically supplied from air source (air compressor, Nitrogen gas cylinder, Factory air, etc.)
- Air supply air pressure: Primary pressure 0.3 ? 0.7MPa (about 3 - 7 kgf/cm2)
- Horizontal maintenance: Automatic adjustment by means of three auto level sensors
- Accessories: Automatic level sensor, Secondary regulator, Secondary air filter, One air tube (5m)
- *1MPa ? 10.197 kgf/cm2
- *Lonleum... PVC as the main material, it is non-magnetic, but effective for stopping slippage of instruments on the mounting plate.
- [Individual specification]
- Mounting plate size C x D: 400 x 480mm
- A: 482mm
- B: 430mm
- E: 510mm
- F: 406mm
- G: 484mm
- H: 144mm
- I: 48mm
- J: 39mm
- K: 14mm
- Weight installable weight: 392N (about 40kgf)
- Mounting plate ***d: A
- Mass: 20kg
- RoHS conform product
Related product recommendations
You may also be interested in the following products
Analyzer, Testing Equipment
61-0309-93 Lanthanum(III) Oxide For Atomic Absorption Spectrometry (AAS) 110982 25G 1.10982.0025
model: 61-0309-93
brand: Merck Millipore Corporation
Analyzer, Testing Equipment
61-0325-76 Trans-Anethole for Synthesis 800429 100mL 8.00429.0100
model: 61-0325-76
brand: Merck Millipore Corporation
Analyzer, Testing Equipment
62-6180-10 Plastic Disk 13 (GMF 0.45 μm) 1 Pack (500 Pieces) 6818-1304
model: 62-6180-10
brand: Cytiva (Whatman)
Analyzer, Testing Equipment
62-8488-67 Anti-Synaptophysin Antibody, clone SP15 (Ascites Free) MAB329-C
model: 62-8488-67
brand: Sigma Aldrich Japan(Millipore)