
Analyzer, Testing Equipment
61-6876-66 Non-Polarizing Cube Half Mirror 266nm A = B = C: 10mm NPCH-10-2660
Product Description
Product Model: 61-6876-66Product Brand: SIGMAKOKI CO., […]
Contact Us
Product Details
Product Model: 61-6876-66
Product Brand: SIGMAKOKI CO., LTD.
Features
- This half mirror provides an accurate 1:1 divergence ratio between reflection and transmission even for laser and linearly polarized light sources.
- Dielectric multilayer film and transparent adhesive are ***d for the reflecting surface, and anti-reflection coat is ***d for the incoming and outgoing surfaces, so light loss is small and incident light can be ***d efficiently.
- The reflection to transmission branching ratio (1:1) does not change when the polarization orientation of linearly polarized light changes.
- We have a lineup that supports lasers of various wavelengths.
- Since it is a cube type, the optical axis of the emitted light will not be translated if the beam is incident vertically.
- Also, even if a beam of the same size as the effective diameter is injected, the transmitted or reflected light will not be lost or reduced.
- * Enter light from the prism side indicated by ○.
- * Reflectivity, branching ratio, and polarization characteristics may change when the other prism is ***d.
- * The phase difference of the incident light is not stored in transmitted light or reflected light.
- * Use a wave plate to compensate for the phase difference.
- * Wavelength dispersion occurs in transmitted and reflected light due to the refractive index of the material and the thickness of the glass.
- * In addition, chromatic aberration and spherical aberration may occur when a converging or diverging beam is injected.
Spec
-
[
common specification]
- Material: BK7 synthetic quartz
- Base material surface accuracy: λ/4
- Transmitted beam polarization angle: <5′
- Coating: Slope dielectric multi-layered film, Side 4 surfaces reflective prevention film
- Incident angle: 0°
- Branching ratio (reflection: Transmission): 1: 1
- Laser durability: 0.3J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- Scratch - dig: 20-10
- Effective range: Circle inscribed to 85% of outer dimensions of square (A=B=C ≦ 7mm: Circle inscribed to 80% of outer dimensions of square)
- [Individual specification]
- Adaptive wavelength: 266nm
- A=B=C: 10mm
- Material: Synthetic quartz
- Transmittance: 50±10%
- RoHS conform product
Related product recommendations
You may also be interested in the following products
62-8351-99 Opticap Gamma Compatible XLT20 Express SHR 0.1μm 1-1/2in. TC/TC 1/pk KVEPG2TTT1
model: 62-8351-99
brand: Sigma Aldrich Japan(Millipore)
61-0337-27 Isopropyl Methyl Ketone for Synthesis 805966 1L 8.05966.1000
model: 61-0337-27
brand: Merck Millipore Corporation