Spec

• Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
• Validate (FAT) before shipping.
• After receiving the order, a FAT instruction form (plan) is sent to the ***r, and after the signature is returned, the FAT is performed.
• App***ix: FAT report/Calibration Certificate of ***d measuring instrument copied
• *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
• Temperature points: 3 points at 37 degrees Celsius
• Temperature range: room temperature + 5 ~ 80 degrees C
• Natural convection system
• Temperature distribution width: 4 degrees C
• Temperature display unit: 1 deg.
• Temperature control system: microcomputer PID control
• Sensor: K thermocouple
• Timer function: ON/OFF/ON/OFF/SV start
• Timer setting range: 1 minute to 99 hours 59 minutes
• Heater capacity: 300 W
• Safety device: Overtemperature protection device/Overcurrent breaker
• Observation small window: 70 x 190 mm
• Shelf pitch: 30 mm (maximum 6 rack)
• Power supply: 100 VAC 50/60 Hz 3 A
• Power cord length: approx. 1.5 m (3 P plug)
• Internal dimensions: 180 x 240 x 220 mm
• External dimensions: 250 x 320 x 400 mm
• Weight: 9.5 kg
• Accessories: 2 shelf boards, 4 shelf receptacles
• Local validation services (IQ/OQ) are also available.　Please contact us.
• *The on-site validation service is a service that performs installation qualification (IQ) and operational performance qualification (OQ) at the installation site and submits an inspection form.
• *If you would like to request a local IQOQ, please contact us separately. We need your installation address for the estimate.