Spec

• Frequency range: Main band: 0.05~1299.99995 MHz Subband: 118~170.995 MHz 336~469.995 MHz (Unguaranteed Extended Subband: 225~335.995 MHz)
• Radio wave type: AM/SSB (USB/LSB)/CW (CU/CL)/FM/WFM
• Antenna impedance (output terminal): 50 Ω unbalanced (SMA terminal)
• Reception: Mainband Triple Super Heterodyne (SSB/AM/CW/FM) Double Super Heterodyne (WFM) Subband Double Super Heterodyne (AM/FM)
• Intermediate Frequency: Intermediate Frequency: Main Band: AM/SSB/CW/FM 1st Intermediate Frequency 243.95 MHz 2nd Intermediate Frequency 45.055 MHz/WFM 10.7 MHz 3rd Intermediate Frequency 455KHz Subband: AM/FM 1st Intermediate Frequency 51.65 MHz 2nd Intermediate Frequency 450KHz
• Reception sensitivity (representative values): 10dBS/N for AM/SSB/CW, 12dBSINAD for FM/WFM Measured values Main band: 0.050~0.531 MHz (AM) 5dBμ 0.531~1.62 MHz (AM) 2dBμ 1.62~76 MHz (AM)-5dBμ 1.62~76 MHz(SSB, CW)-10dBμ 1.62~76 MHz (FM)-15dBμ 76~108 MHz (WFM)-3dBμ 108~136 MHz (AM)-6dBμ 136~174 MHz (FM)-14dBμ 175~221.75 MHz (WFM)-6dBμ 221.8~336 MHz (AM) 0dBμ 336~475.75 MHz (FM)-13dBμ 475.75~770 MHz (WFM)-13dBμ 770~1260 MHz (FM)-9dBμ 1260~1300 MHz (FM)-6dBμ Subband: 118~136 MHz (AM)-3dBμ 136~170 MHz (FM)-14dBμ 336~470 MHz (FM)-14dBμ * The extended subband 225.000~335.995 MHz is not included in the rating, The closer to 1.62~76 MHz, the better the sensitivity. The extended subband is a reception band that does not meet the performance guaranteed by our company, so it can be selected by key operation, and is set to "No reception" at the factory.
• Power Supply Voltage: External Power Terminal 5.4~6 V DC AA Batteries x 3 4.5 V Battery Pack 3.7 V (Li-Ion)
• Grounding method: negative ground
• Current consumption: At rated output (when external power supply is used): Mono-band approx. 130 mA Dual-band approx. 180 mA
• Frequency stability (-10°C to 60°C): within ±2.5ppm
• Low frequency output: 100 mW or more (8 Ω)
• In addition to USB connection from the charging stand to the PC, remote function to operate the X11 from the PC in real time, memory utility software, and cable clone, existing reception software such as SDR (Software Defined Radio) and AIS (Automatic Vessel Identification System) signal plot can be used by inputting IQ and detection signals from the earphone jack to the PC. *An optional or commercially available cable is required for connection to a PC or cable cloning.
• [Standard Accessories]
• Whip Antenna/SMA Connector EA-154
• Lithium Ion Battery Pack 1800mAh EBP-74
• Free Belt Clip EBC-23 & Hand Strap
• Charging Stand & Adapter Set EDC-174A
• Battery Case EDH-36