Spec

• Product Type: USB To Specific Interface Conversion Cable
• Cable length: 0.15 m
• Connector shape (From-To): USB3.2 Gen1 (3.1/3.0) Type-C connector male (upstream), USB3.2 Gen1 (USB3.1/3.0) A connector female x (downstream), USB Type-C connector female x (compatible with PD3.0 100 W)
• Specifications: [USB Hub]
• Interface standard: Compliant with USB specification Ver. 3.2 Gen1 (USB3.1/3.0) (Upward compatible with USB Ver. 2.0/1.1) * USB3.2 Gen1 is the same standard as USB3.1/3.0 whose name was changed by USB-IF (USB Implementers Forum).
• 5Gbps, 480Mbps, 12Mbps
• Connector shape: USB3.2 Gen1 (3.1/3.0) Type-C connector male (upstream), USB3.2 Gen1 (USB3.1/3.0) A connector female x1 (downstream), USB Type-C connector female x1 (compatible with PD3.0 100 W)
• Power: Both self-powered and bus-powered
• Supply current: 1500 mA * Maximum per 1 port
• PD Support: Support
• PD Specifications: 100 W 12 V 5 A [LAN Port]
• Standards: IEEE802.3 (10BASE-T), IEEE802.3u (100 BASE-TX), IEEE802.3ab (1000BASE-T)
• Communication mode: Full duplex/Half duplex
• Theoretical transmission speeds: 1000Mbps, 100Mbps, 10Mbps
• access methods: CSMA/CD
• Port shape: RJ-45 port (Auto MDI/MDI-X) with Auto-Negotiation
• Power supply voltage: 5V [Video output port]
• Port Shape: HDMI Type A (19pin) Female x1
• Supported resolution: HDMI/up to 3840x2160 (4 K 60 Hz)
• Dual Display Output: Supported [Common Specifications]
• Cable length: 15 cm
• Size: Approx. W106xD23xH17.4mm
• Weight: about 55 g
• Set Contents: Main Unit, Cable Ties, Owner's Manual
• Body External Dimensions: Approx. W106xD23xH17.4mm
• Weight: about 55 g
• Power: Both self-powered and bus-powered
• Accessories: Main Unit, Cable Tie, Instruction Manual
• Code: SN10SYK