
Analyzer, Testing Equipment
61-0270-79 Optiscale Caps Polysep II 2.0/1.2μm 3/4In. TC/TC 3/Pk 3 x 1ST SGW9A47FF3
Product Description
Product Model: 61-0270-79Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0270-79
Product Brand: Merck Millipore Corporation
Spec
-
Filtration area, cm
2
: 17.7 - Diameter, cm (inch): 6.9 (2.7)
- Support material: Polypropylene
- Seal material: Fluoroelastomer
- Device material: Polycarbonate
- Pre-filter material: Borosilicate glass Fiber
- Vent cap material: PVDF
- Material: Cellulose mixed ester
- Brand name: Optiscale
- Main application: Laboratory Filtration
- Form: Capsule
- Connection, Inlet/outlet: 19mm (3/4in.) sanitary flange
- Quantity/box: 3
- Overview: OptiScale capsule Polysep II 2.0/1.2μm 3/4in. TC/TC
- Product name: OptiScale disposable capsule filter
- Maximum Inlet Pressure (psig): 80
- Maximum Inlet Temperature, °C: 25
- Nominal bore diameter, μm: 2,0 / 1,2
-
Maximum input pressure, kPa (psi): 552 (80) @ 25
°C - Sterilization: Autoclave sterilization at 121 ℃ for 60 minutes; in-line steam sterilization impossible
- Potassium permanganate reduced substance: After flushing by following water, comply with USP Oxidizable Substances Test ? 100mL
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
62-6175-03 Qualitative Filter Paper (Grade 5 47 mm) 1 Pack (100 Sheets) 1005-047
model: 62-6175-03
brand: Cytiva (Whatman)
61-6433-32 Elite-17MS,30m,0.25mmid,0.25μm N9316538
model: 61-6433-32
brand: PerkinElmer, Inc.
61-0312-88 Spectroquant(R) Manganese Test Measurement Principle: Photometric Analysis 0.010-10.00mg/L Mn 114770 500Tests 1.14770.0001
model: 61-0312-88
brand: Merck Millipore Corporation
62-8353-17 Millistak+R Pod filter grade CE25 0.11m2 1/pk MCE2501FS1
model: 62-8353-17
brand: Sigma Aldrich Japan(Millipore)