Analyzer, Testing Equipment
61-0250-95 Opticap Sterile XLT30 Durapore 0.22μm GC 5/8In HB/HB 1/Pk 1ST KVGLS3THH1
Product Description
Product Model: 61-0250-95Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0250-95
Product Brand: Merck Millipore Corporation
Spec
- Filter bore diameter, μm: 0.22
- Length, Inch (cm): 30 (75)
- Support material: Polyester
- Seal material: Silicone
- Device material: Gamma compatible polypropylene
- Vent cap material: Polypropylene
- Material: Hydrophilic PVDF
- Housing: Polypropylene
- Filter brand name: Durapore(R)
- Brand name: Opticap
- Main application: Laboratory Filtration
- Form: Capsule
- Maximum Inlet Pressure (psig): 80
- Maximum Inlet Temperature, °C: 25
- T-line/Gauge Port: T-line
- Wettability: Hydrophilic
- Sterility: Sterilized
-
Total extract: The extractables level was equal to or less than 75
mg per capsule after 24
hours in water at controlled room temperature. - Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 3L
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
61-0228-33 Durapore Cart Filt 5In. 0.22μm Code 7 1/Pk 1ST CVGL75S01
model: 61-0228-33
brand: Merck Millipore Corporation
61-0291-41 1-Butanol for Analysis Emsure(TM) ACS, ISO, Reag. pH Eur 101990 2.5L 1.01990.2500
model: 61-0291-41
brand: Merck Millipore Corporation
61-0267-17 Pellicon 2 Mini UF Mod PLCHK C 0.1m2 1/Pk 1ST P2C100C01
model: 61-0267-17
brand: Merck Millipore Corporation
61-0289-70 May-Grunwald Eosin Methylene Blue (Powder) for Microscope 101352 25G 1.01352.0025
model: 61-0289-70
brand: Merck Millipore Corporation