
Analyzer, Testing Equipment
61-0247-80 Opticap XL2 Durapore 0.45μm W/O Pref 1.5In. TC/TC 3/Pk 3 x 1ST KPHLA02TT3
Product Description
Product Model: 61-0247-80Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0247-80
Product Brand: Merck Millipore Corporation
Spec
-
Filtration area, cm
2
: 900 -
Filtration area, m
2
: 0.09 - Filter bore diameter, μm: 0.45
- Diameter, cm (inch): 14.5 (5.7)
- Length, Inch (cm): 2 (5)
- Support material: Polypropylene
- Seal material: Silicone
- Device material: Polypropylene
- Vent cap material: Polypropylene
- Material: Hydrophilic PVDF
- Housing: Polypropylene
- Filter brand name: Durapore(R)
- Brand name: Opticap
- Main application: Laboratory Filtration
- Substitute: SN1M065A4
- Package: Double easy open bag
- Form: Capsule
- Connection, Inlet/outlet: 38mm (1-1/2in.) sanitary flange
- Quantity/box: 3
- Overview: Opticap XL2 Durapore 0.45μm without pre-filter 1-1/2in. TC/TC
- Product name: Opticap XL capsule filter
- Maximum Inlet Pressure (psig): 80
- Maximum Inlet Temperature, °C: 25
-
Bubble point, 23 °C:
193kPa (28 psig) air with water -
Maximum input pressure, kPa (psi): 552 (80) @ 25
°C; 276 (40) @ 60
°C; 103 (15) @ 80
°C - Maximum differential pressure, kPa (psid): Positive direction - 345 (50) at 25℃ (without pre-filter); reverse direction - 345 (50) at 25℃, intermittent
- Wettability: Hydrophilic
- Sterilization: Autoclave sterilization 3 times for 60 minutes at 126℃; no in-line steam sterilization
- Sterility: No sterilization
-
Total extract: The extractables level was equal to or less than 10
mg per capsule after 24
hours in water at controlled room temperature. - Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 500mL
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
61-0389-86 [Discontinued]Fmoc-Met(O2)-OH 852212 1G 8522120001
model: 61-0389-86
brand: Merck Millipore Corporation
61-0405-24 [Discontinued]H-Ala-Hmpb Novapeg Resin 856166 5G 8.56166.0005
model: 61-0405-24
brand: Merck Millipore Corporation
62-8516-84 Anti-ATF-3 Antibody, clone 13A5.1 MABN124
model: 62-8516-84
brand: Sigma Aldrich Japan(Millipore)
61-6430-85 [Discontinued]Elite-Volatiles,60m,0.32mmid,1.80μm N9316391
model: 61-6430-85
brand: PerkinElmer, Inc.