
Analyzer, Testing Equipment
61-0243-04 Opticap XL10 Polysep II 1/0.2/0.1μm 3/4In. TC/TC 1/Pk 1ST KGW1A10FF1
Product Description
Product Model: 61-0243-04Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0243-04
Product Brand: Merck Millipore Corporation
Spec
-
Filtration area, m
2
: 0.42 - Diameter, cm (inch): 10.7 (4.2)
- Length, cm (inch): 33.5 (13.2)
- Length, Inch (cm): 10 (25)
- Support material: Polypropylene
- Seal material: Silicone
- Device material: Polypropylene
- Pre-filter material: Borosilicate glass Fiber
- Vent cap material: Polypropylene
- Material: Cellulose mixed ester
- Housing: Polypropylene
- Format: Triple Layer
- Brand name: Opticap
- Main application: Laboratory Filtration
- Package: Double easy open bag
- Form: Capsule
- Connection, Inlet/outlet: 19mm (3/4in.) sanitary flange
- Quantity/box: 1
- Overview: Opticap XL10 Polysep II 1.0/0.2/0.1μm 3/4in. TC/TC
- Product name: Opticap XL capsule filter
- Maximum Inlet Pressure (psig): 80
- Maximum Inlet Temperature, °C: 25
- Nominal bore diameter, μm: 1.0 / 0.2 / 0.1
-
Maximum input pressure, kPa (psi): 552 (80) @ 25
°C; 276 (40) @ 60
°C; 103 (15) @ 80
°C -
Maximum differential pressure, kPa (psid): 345 (50) @ 25
°C - Sterilization: Autoclave sterilization 3 times for 30 minutes at 121℃; no in-line steam sterilization
- Sterility: No sterilization
-
Total extract: The extractables level was equal to or less than 145
mg per capsule after a 5
L flush and 24
hours in water at controlled room temperature. - Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 5L
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
2-3048-36 Fluorinert Membrane 3μm x Φ90mm 25 Pieces FSLW09025
model: 2-3048-36
brand: Merck Millipore Corporation
62-8354-36 Die kits 1/2 in. ID x 3/4 in OD; 1 kit NM0023
model: 62-8354-36
brand: Sigma Aldrich Japan(Millipore)
61-0325-52 Maleic Anhydride for Synthesis 800408 1kg 8.00408.1000
model: 61-0325-52
brand: Merck Millipore Corporation
61-0310-01 M Color Test(TM) Dissolved Oxygen Test Measurement Principle: Titration Analysis (Using Pipet for Titration), Winkler Method Aquamerck(R) 111107 100Tests 1.11107.0001
model: 61-0310-01
brand: Merck Millipore Corporation