Analyzer, Testing Equipment
61-0230-16 Clarigard Cart Filt 10In. 0.5μm Code F PE 1/Pk 1ST D005F1P01
Product Description
Product Model: 61-0230-16Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0230-16
Product Brand: Merck Millipore Corporation
Spec
- Diameter, cm (inch): 6.7 (2.6)
- Length, Inch (cm): 10 (25)
- Seal material: Polyethylene
- Device material: Polypropylene
- Material: Polypropylene
- Brand name: Clarigard
- Main application: Laboratory Filtration
- Form: Cartridge
- Quantity/box: 1
- Overview: Clarigard cartridge filter 10in. 0.5μm code F PE
- Product name: Clarigard cartridge filter
- Cartridge code: Code F with flat gasket double door type
- Nominal bore diameter, μm: 0.5
-
Maximum input pressure, kPa (psi): 4.8 (70) @ 25
°C -
Maximum differential pressure, kPa (psid): 483 (70) @ 25
°C - Wettability: Easily wetted with water
- Sterilization: Autoclave sterilization at 126℃ for 30 minutes or 10 times of SIP sterilization
-
Total extract:
10mg after soaking it in water for 24 hours - Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 3L
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
2-7772-01 [Discontinued]Vented Millex GS 0.22μm・Φ25mm SLGSV255F
model: 2-7772-01
brand: Merck Millipore Corporation
61-0373-55 Span 80 for Synthesis 840123 500mL 8.40123.0500
model: 61-0373-55
brand: Merck Millipore Corporation
62-8359-08 1/4 in. Lynx ST Connector 10/Pk STC11FHA10
model: 62-8359-08
brand: Sigma Aldrich Japan(Millipore)
65-0310-41 Nuclipore Membrane (PC MB 37 mm 0.8 μm) 1 Box (100 Sheets) 10417309
model: 65-0310-41
brand: Cytiva (Whatman)