toner
61-4672-95-56 ［Discontinued］Wireless Multichannel Thermo-hygrometer with English Calibration Certificate AD-5663
Product Description
Product Model: 61-4672-95-56Product Brand: A&D Feat […]
Contact Us
Product Details
Product Model: 61-4672-95-56
Product Brand: A&D
Features
- Wireless Thermohygrometer Communication range is up to 100 m (line-of-sight distance)
- Check temperature and humidity at a distance
- Multi-channel support available
- 1 slave unit (external sensor) included
- Alarm notification with red LED lamp and buzzer
- Display the environmental temperature, humidity and 2 probe temperatures of the slave unit at the same time on the master unit
- Can be added (Up to 5 subunits of the AD-5663 01 can be created for each parent unit)
- Can be ***d in agricultural ho***s, factories, production sites, wareho***s, gymnasiums, etc.
- The probe of the slave unit can measure environmental temperature and liquid temperature
- The built-in sensor of the slave unit can measure environmental temperature and humidity
- One environmental temperature, one environmental humidity and two center temperatures can be measured at the same time for each slave unit
- The slave unit of the AD-5663 complies with the technical standards for specified low-power equipment based on the Radio Law and has been approved.
Spec
- Measurement range [sub unit]: Temperature (TA) 0 to 50 °C, Temperature Probe (T1 ・ T2) -40 to 70 °C, Humidity (RH) 20 to 90 %RH
- Measurement accuracy temperature (TA) [sub unit]: ± 1 °C (10 to 39.9 °C), ± 2 °C (0 to 9.9 °C, 40 to 50 °C)
- Accuracy of measurement Humidity (RH) [sub unit]: ± 5 %RH (30 to 69 %RH), ± 10 %RH (20 to 29 %RH 70 to 90 %RH)
- Measurement accuracy Temperature probe (T1, T2) [sub unit]: ± 1 °C (10 to 39.9 °C), ± 2 °C (-10 to 9.9 °C, 40 to 49.9 °C), ± 3 °C (-40 to -10 °C, 50 to 70 °C)
- Display Range: Temperature (TA): -20 to 70 °C, Temperature Probe (T1/T2): -40 to 70 °C, Humidity (RH): 5 to 99 %RH
- Minimum display: Temperature (TA): 0.1 °C, Temperature Probe (T1/T2): 0.1 °C, Humidity (RH): 1 %RH
- Operating (***) Temperature and Humidity Range: 0 to 50 °C, 0 to 90 %RH (non-condensing)
- Power Supply: AA size alkaline battery 4 pieces, AC adaptor (sold separately)
- Accessories: Owner's Manual, AA size battery 4 pieces (for monitor), sub unit AD -5663 01 (with Temperature Probe 2 pieces)
- *A product with a calibration certificate is an original service of Azwan which calibrates measuring instruments at the time of shipment by AS ONE or a AS ONE partner company and issues calibration certificate.
- This product is a general calibration. calibration certificate (calibration certificate, test results report, traceability system chart) is attached.
- *It comes with both a set of 3 Japanese documents and a set of 3 English translations.
- Calibration points are 1 point each for temperature 25 °C and humidity 50%. If you would like other points, please contact us separately.
Related product recommendations
You may also be interested in the following products
toner
4-1653-01 Residual Chlorine Test Paper 15 sec., 100 Pieces 5155
model: 4-1653-01
brand: Serim Research
toner
67-9233-12 Temperature Sensor φ2.1 mm Pipe Length BSM Series for General Use of Semi-Solids and Liquids BSM-21E-010-TC1-ASP
model: 67-9233-12
brand: ANRITSU METER CO., LTD.
toner
2-3167-01 ［Discontinued］ML Scale Balance 220G 0.001G ML203
model: 2-3167-01
brand: Mettler-Toledo International Inc.
toner
65-3533-38 ［Out of stock］Solder Iron Tip Temperature Sensor CR Series with ISO Document Set 0~500°C Iron Tip Diameter: φ1.5 mm or Less E Type 1 Set (2 Pieces) CR-31E
model: 65-3533-38
brand: ANRITSU METER CO., LTD.