![62-0854-87 [Discontinued]Optical Power Meter Calibration Document 3 Points (Brand New Calibration) OPM37LAN](https://www.jgauge.com/wp-content/uploads/2025/06/34c374b707dbd7e4b02bfd198ba8c574.webp)
toner
62-0854-87 [Discontinued]Optical Power Meter Calibration Document 3 Points (Brand New Calibration) OPM37LAN
Product Description
Product Model: 62-0854-87Product Brand: SANWA ELECTRIC […]
Contact Us
Product Details
Product Model: 62-0854-87
Product Brand: SANWA ELECTRIC INSTRUMENT CO., LTD. (Sanwa)
Features
- dBm and W measurements.
- Measured relative value dB (REL), measured W (REL).
- Offset function and average value processing function. (20 Data Sequential Averaging)
- Direct-read wavelength mode. (650 nm, 780 nm, 800 nm, 850 nm, 880 nm) • Equipped with RS-232C interface.
- Various optical connectors can be connected by replacing the optical connector adapter.
- The sensor part using the attached sensor extension cord (2 m) can be separated for ***.
Spec
- Photo acceptance unit: Si photodiode (acceptance surface size: 5.8 x 5.8mm)
- Measurement range: -60.00 to +13.00dBm/1.000n - 20.00mW
- Optical input method; direct photodiode
- Direct reading calibration wavelength: 650n/780n/800n/850n/880nm
- Accuracy: ±5% (at direct reading calibration wavelength -20dBm/10μW)
- *Temperature:18 - 25℃, Humidity: 80%RH or less, No condensation
- Power supply: 6LF22/6LR61 (9V alkaline cell), AC adapter
- Dimensions/mass: H164 x W85 x D35mm/Approximately 300g
- Sensor head: φ25 x 26mm/25g
- Accessories: optical sensor, Sensor extension cord , AC adapter, FC type (F01 type) optical connector adapter
- General calibration (with 3 ISO documents): Traceability certificate, certificate of test, calibration certificate
- *Calibration point follows the provisions of the Manufacturer.
- *Please tell us your name and address for the certificate.
Related product recommendations
You may also be interested in the following products
61-9416-56 [Discontinued]Gas Detector Tube Polytec IV with Calibration Certificate (With Certificate Of Test) 27
model: 61-9416-56
brand: GASTEC Corporation
2-4964-01-20 Ultrafine K Thermocouple (sheath type, with connector) without Lead Wire with Calibration Certificate DS-101050
model: 2-4964-01-20
brand: AS ONE Corporation