Spec

• Flow rate range: 0.5 ~ 48 mL/min
• Performance:
• Flow rate accuracy: +/- 1%
• Discharge pressure/Working fluid temperature: Max. 686 kPa (7 kg/cm 2)/0 ~ 65 degrees C (non-freezing)
• Rotating speed: 0 ~ 280 rpm
• Features:
• Rotation setting and display: Volume setting, stroke length change (4 levels)
• Liquid feeding direction: Forward/reverse switchable
• Safety features: Thermal protector
• Includes: Max. flow switch (Max. Rotational flow discharge at selected stroke length)
• External input/output: External signal input (0 ~ 10 VDC)
• Configuration:
• Motor: DC Brushless motor output 15 W
• Liquid feeding part materials: Ceramic (Al2O3, ZrO2), Teflon ® (PTFE), Diflon ® (PCTFE)
• Standard:
• Applicable tube/plunger diameter: outer diameter 3 mm/outer diameter 5 mm
• Applicable Fit: F -30
• Attached joint bore: 1/4 -28 UNF (in)
• Operating ambient temperature range: 5 ~ 35 degrees C
• External Dimensions (mm)/Mass: 291 (313.5) W x 170 D x 122 (148) H x 5.1 kg
• Power input/voltage: 0.5 A, 50 VA/AC 100 V 50/60 Hz
• *Performance is measured at room temperature of 25 degrees Celsius, rated power supply voltage of 50 Hz, clean water, liquid temperature of 21 degrees Celsius, back pressure of 0 and with a specified Teflon ® tube.
• *The supplied joints can be replaced with tube fittings.
• *Dimensions in parentheses include projections.
• Accessories:
• Teflon ® tubes (inner diameter x outer diameter mm): 2 x 3, 1 m x 2
• Fit: F -30 x 2
• Set screw: F -30 x 2
• Consumables: head seal, lip seal
• Code: 164330