Spec

• Speed range: 140 ~ 1300 rpm (50/60 Hz) continuously variable
• Evaporating capacity: 1.5 L/h hot water 70 degrees C circulating
• Operating vacuum: 2.5 kPa
• Viscosity ***d: about 100 cP
• Rotating shaft seal: Non-seal with magnet coupling
• Evaporation tube: glass-jacketed
• Cooler: Vertical triple serpentine cooling area: 0.5 m2
• Receiving flask: 3 L for both concentrate and evaporant side (with drain cock)
• Wetted part material: Hard glass, Teflon (R), SUS 304
• Connection diameter: outside diameter of suction/cooling nozzle: 16 mm
• Heating system: Hot water circulation
• Sample injection method: Needle valve
• Operating ambient temperature range: 5 ~ 35 degrees C
• External dimensions: 620 x 500 x 1970 mm
• Power input/voltage: 2 A, 200 VA/AC 100 V 50/60 Hz
• *Performance is measured at room temperature of 20 degrees Celsius and rated supply voltage.
• *Evaporation capacity varies dep***ing on conditions such as decompression conditions, hot water circulation and cooling water temperature.
• *The degree of vacuum during operation dep***s on the cooling water temperature, the decompression device and the sample.
• *Vacuum pumps, cooling water circulators, etc. are required for ***.
• Code: 1175902