laboratoryinstruments
63-1395-26 ［Discontinued］Explosion-Proof Type Rotary Evaporator 10 L N-3010d
Product Description
Product Model: 63-1395-26Product Brand: TOKYO RIKAKIKAI […]
Contact Us
Product Details
Product Model: 63-1395-26
Product Brand: TOKYO RIKAKIKAI CO., LTD.
Features
- Medium-sized 10 L Type
- Explosion-proof type that does not *** an air motor or steam heating type electricity in the drive section. Suitable for concentration and recovery of low boiling point solvents.
- It comes with a trestle, so you can easily move and operate the body.
Spec
- Round Flask 10 L (Aperture 100 mm)
- Speed range: 10 ~ 120 rpm continuously variable
- Evaporation capacity: dep***ing on the amount of steam heat source, cooling conditions and operating conditions
- Reached vacuum: 2.6 hPa (2 Torr) or less
- Motor: Air motor output 250 W
- Heating part: Corrugated tube heat exchanger SUS 304 steam inlet/outlet bore 16 mm
- Cooler: Vertical triple serpentine, cooling area: 0.5 m2
- Receiving flask: Round flask 5L (with drain valve)
- Vacuum Seal: Teflon (R) Seal
- Inside Bus Dimensions/Capacity/Material: Inner diameter 360 x 200 mm/20 L/SUS 304
- Connection diameter: outside diameter of suction nozzle: 16 mm, outside diameter of cooling water nozzle: 16 mm
- Bass jack stroke: 145 mm (manual)
- Pneumatic pressure for rotary motor: Pressure 0.6 MPa (6 kg/cm 2) Flow rate 0.3 m3/min (maximum consumption without load)
- Operating temperature range: room temperature + 10 to 80 degrees C
- Operating ambient temperature range: 5 ~ 35 degrees C
- External dimensions: 930 x 472 x 1890 mm
- Weight: 93 kg
- Code: 248210
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
65-0570-72 Flow Stop Valve for NCB -1210 and 1220
model: 65-0570-72
brand: TOKYO RIKAKIKAI CO., LTD.
laboratoryinstruments
68-0449-50 Graduated Glass Capillary Micropipette Suction Tube Silicon Cap (Small Hole Diameter Type) x 4 Each 2-040-000
model: 68-0449-50
brand: Drummond Scientific Company
laboratoryinstruments
4-5917-56 Dish Lid Set for Stainless Steel Test Sieve φ50 x Depth 20
model: 4-5917-56
brand: NONAKA RIKAKI Co., Ltd.
laboratoryinstruments
1-2124-02-22 ［Out of stock］Multi-Thermal Unit (Inverter Type) With Pre-Shipment Inspection Certificate TMi-330
model: 1-2124-02-22
brand: AS ONE Corporation