![63-1238-16 [Discontinued]Low-temperature incubator TVG241AA](https://www.jgauge.com/wp-content/uploads/2025/06/24504fa42bca635a88bcb9327f3e0b4d.webp)
laboratoryinstruments
63-1238-16 [Discontinued]Low-temperature incubator TVG241AA
Product Description
Product Model: 63-1238-16Product Brand: ADVANTEC Featur […]
Contact Us
Product Details
Product Model: 63-1238-16
Product Brand: ADVANTEC
Features
- Convenient for medium and low temperature culture and reagent storage.
- A powerful fan circulates the air in the chamber and controls the temperature from 2°C to 50°C.
- Since it has a moisture-proof outlet inside, it is convenient to *** a small shaking culture device.
Spec
- convection formula: Forced circulation type (internal fan)
- Operating temperature range: 2 °C, to 50 °C
- Temperature Adjustment Accuracy: ± 0.5 °C
- Temperature distribution accuracy: ± 1 °C, to ± 2 °C
- Ambient operating temperature: 6 °C, to 35 °C
- temperature controller: Microcomputer PID Control
- Temperature Sensor: Platinum Temperature Measuring Resistor Pt 100 Ω
- heaters: fin heaters
- Heater capacity: 300 W x 2 pieces
- Freezer: 125 W R 134 a
- Cooler: Fin Tube Type
- Defrosting method: off-cycle defrosting method
- Door: Double Glass Sliding Door (with ultraviolet ray Absorbing Film)
- Safety device: Self-diagnostic function (temperature sensor disconnection), indep***ent overheat prevention device, indep***ent supercooling prevention device, refrigerator overload prevention device, overcurrent/leakage breaker
- inner dimension: W 830 mm x D 468 mm x H 645 mm (W 760 mm x D 400 mm x H 615 mm)
- external dimensions : W 900 mm x D 550 mm x H 1,085 mm
- Internal Volume: Approximately 236 L
- shelf board: 4 pieces Load tolerance 38 kg/sheet multi-stage adjustable (shelf board has 1 sheet in 2 pieces)
- Cable Hole: φ 13.5 mm
- Internal power supply Port: AC100V 2A Moisture Proof Outlet Port 1 piece
- power supply (50Hz/60Hz): AC100V 9A
- Required power supply Equipment: AC100V 20 A
- Mass: about 82 kg
- Accessories: shelf board 4 pieces, Shelf 8 pieces, Bottom Shelf 1 piece, Silicone rubber plug 1 piece, Internal Moisture Proof power supply Plug 1 piece, Drain Dish 1 piece, Overcurrent Protection F*** (2A) 1 piece (Overcurrent Protection F*** is for replacing Moisture Proof Outlet)
Related product recommendations
You may also be interested in the following products
2-8157-01 [Discontinued]Small Heat Press Machine (With Cooling Function) AH-1TC
model: 2-8157-01
brand: AS ONE Corporation