toner
1-5802-11 ［Discontinued］Water Level Holding Controller WLC-SA
Product Description
Product Model: 1-5802-11Product Brand: AS ONE Corporati […]
Contact Us
Product Details
Product Model: 1-5802-11
Product Brand: AS ONE Corporation
Features
- The large ring compresses the tube to reduce load and assure long life.
- Only the tube touches the liquid due to adoption of ring pump.
- This product is also applicable to pure water.
- The sucking disc type water level sensor can be installed at an arbitrary depth inside the water bath.
- This product can be attached to the edge of the water bath, or installed on the floor.
- LED lights on while water is being supplied.
Spec
- Supply water volume: Maximum 800mL/min
- Operating supply water temperature: 60℃ or lower
- Motor: DC motor
- Water level detection: Float type sensor
- Material: Body/Stainless steel (SUS304), Tube/Norprene(R)
- Clamp mounting width: 25mm
- Power supply: 100VAC 50/60Hz 0.6A
- Power cord length: 1.5m
- Accessories: AC adapter 100VAC/DC24V 1.5A, water intake hose (1m) x 1
- Size (mm): 85 x 142 x 142
- Weight (kg): 1.4
- *Supply water tank (container) is not included in the package. *Some liquid are not available in tube material, float, water intake hose.
- Model number: WLC-SA
Related product recommendations
You may also be interested in the following products
toner
65-3594-97 KOT Small Pressure Gauge Type A φ50 G1/4 0~0.7MPA AT14-500.7MPA
model: 65-3594-97
brand: Daiichi Keiki Mfg
toner
64-0702-85 Mercury-Free Rod Standard Thermometer 0 ~ 50 °C (0.2) with general calibration certificate 1-NM-S21-ACS
model: 64-0702-85
brand: ANDO KEIKI
toner
64-8874-01 Dual Type Thickness Meter "Escal" LZ-990
model: 64-8874-01
brand: Kett Electric Laboratory
toner
67-7066-79 Pack Test for TOC 50 times WAK-TOC
model: 67-7066-79
brand: KYORITSU CHEMICAL-CHECK Lab., Corp.