Spec

• Setting range (deg. C): -19.9 to + 99.9
• Minimum Display Units (deg. C): 0.1
• Number of pieces: 1
• Sensor sheath material: SUS 316
• Sensor dimensions: phi 3.2 x 200 mm
• Cable length: 2 m
• Temperature control accuracy: +/- 0.3% FS +/- 1 digit
• Temperature control: PID control (auto-tuning/SSR system)
• Attached sensor: Pt 100 ohm
• External dimensions: 135 x 145 x 95 mm
• Power supply: 95 ~ 240 VAC 50/60 Hz 15 A
• Connection capacity: Resistance load MAX 15 A
• Accessories: 100 V wire with 3 P plug, 200 V wire + ground wire, 3 Temperature Sensors, 3 ground wires
• *There is no outlet plug for single-phase 200 V.
• *Install the product in such a way that the temperature of the sleeve is below 100 degrees Celsius.
• Calibration points are 25 degrees Celsius and 2 points of 80 degrees Celsius. If you would like additional points, please contact us separately.