Spec

• Type: Medium vacuum 30L
• Number of connected cylinders: 2 strand
• Cylinder piping type: Series connection
• Exhaust speed (L/min): 50Hz: 30
• Exhaust speed (L/min): 60Hz: 36
• Ultimate vacuum pressure (Pa abs): 50Hz: ? 350
• Ultimate vacuum pressure (Pa abs): 60Hz: ? 300
• Ultimate vacuum pressure (kPa G): 50Hz: ? -100.95
• Ultimate vacuum pressure (kPa G): 60Hz: ? -101.0
• Maximum suction pressure: Atmospheric pressure
• Ambient environment temperature (indoor) (℃): -5 - 40
• Ambient environment humidity (indoor): 85% RH or less (non condensing)
• Atmosphere (inhalation gas): Atmosphere where no corrosive and flammable gas
• Installation location vibration: 4.9m/s2 or less (10 - 60Hz)
• Altitude of installation location: Altitude of 1,000m or lower
• Installation posture: Installed with motor shaft horizontal
• Electric motor: Output (W): -40, Type: Single phase condenser type, induction motor thermal protector integrated, heat resistance class 130 (B), Voltage (V): 100, Rated current (A): 50Hz: 0.83, 60Hz: 0.7, Rated rotation speed (min￣1): 50Hz: 1250, 60Hz: 1,600, Starting current (A): 50Hz: 1.7, 60Hz 1.5
• Operation noise (dB (A)): 50Hz: ? 58, 60Hz: ? 63 (*Operation noise dep***s on the conditions of *** and cannot be guaranteed beca*** it is based on the measured value excluding inlet noise and discharge noise. )
• Inlet port connection port size: G3/8
• Exhaust port connection port size: G1/4
• Dimensions (all width x depth x overall height) (mm): 125 x 289.6 x 180.7
• Mass (kg): 7.6 (*including accessories)
• Cooling method: Forced air cooling
• Power switch is built-in type. Also, Note that it does not conform to the CE marking.
• RoHS supported
• Motor type: Single phase 100V, Induction motor with power switch
• Intake side fitting: No fittings required
• Exhaust side fitting: No fittings required
• Exhaust cleaner (and fitting): Not either exhaust cleaner nor fitting is required