laboratoryinstruments
2-1200-11-28 ［Discontinued］Vacuum dryer (V-CR series) with Pre-shipment Validation AVO-200V-CR
Product Description
Product Model: 2-1200-11-28Product Brand: AS ONE Corpor […]
Contact Us
Product Details
Product Model: 2-1200-11-28
Product Brand: AS ONE Corporation
Features
- A high-performance model with excellent chemical resistance.
- A vacuum pump connection valve and vacuum gauge are placed on the front operation panel for easy piping and operation.
- Double doors with tempered glass doors and protective polycarbonate doors are ***d.
- Heat-resistant fluorine rubber packing provides superior durability and airtightness.
- In addition to a two-stage PV/SV display that makes it easy to check measured values and set values, an overtemperature prevention set temperature display is adopted. Based on the V series, all the gas contact parts are coated with stainless steel, fluororubber, ceramic and other materials with excellent chemical resistance. (Not explosion-proof)
Spec
- Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
- Validate (FAT) before shipping.
- After receiving the order, a FAT instruction form (plan) is sent to the ***r, and after the signature is returned, the FAT is performed.
- App***ix: FAT report/Calibration Certificate of ***d measuring instrument copied
- *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
- Temperature point: one temperature point, vacuum degree
- Storage capacity (L): 8
- Additional functions: Timer function (ON/OFF/ON/OFF Timer/SV start)
- Sensors: K thermocouples x 2 (1 each for temperature control and excessive rise prevention)
- Safety devices: overrise prevention function (digital setting type), self-diagnosis function (heater disconnect detection/sensor malfunction detection), overcurrent breaker
- Material
- Exterior: Steel Baked Paint
- Interior: SUS 304 chemical-resistant ceramic coating
- Shelf: Aluminum Refractory Ceramic Coating
- Piping and fittings: SUS 304 chemical-resistant ceramic coating
- Valve/Vacuum gauge: Stainless steel (SUS 316, PTFE)
- Door packing: Fluorine rubber
- Observation Window: Tempered Glass (12 mm Thickness)/Polycarbonate Protective Plate
- External dimensions (mm): 343 x 396 x 509
- Interior dimensions (mm): 200 x 200 x 200
- Heater capacity: 800 W
- Power supply: 100 VAC 50/60 Hz 8 A
- Power cord length: 2.5 m
- Weight: approximately 25 kg
- Accessories: 2 shelf boards
- Heating method: Can body heating method
- Temperature setting range: 40 ~ 220 degrees C
- Operating vacuum range: 0.1 ~ 101 kPa
- Control method: PID control and SSR output
- Valve diameter: 13 mm in outside diameter
- *If you would like to request a local IQOQ, please contact us separately. We will need your installation address for the estimate.
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
3-7047-01 ［Discontinued］Cool Block Bath Room Temperature -25 - 110℃ HC110-Pro
model: 3-7047-01
brand: DLAB
laboratoryinstruments
laboratoryinstruments
1-7734-02 PTFE Stirring Rod (Hollow) φ8 x 100mm 003.1100 3.11
model: 1-7734-02
brand: AS ONE Corporation
laboratoryinstruments