![3-6761-01 [Discontinued]Sealed Inert Gas Oven (Forced Convection System) IGO-310](https://www.jgauge.com/wp-content/uploads/2025/06/b59609aee1627a2a8d4c4102a67b21fb.webp)
laboratoryinstruments
3-6761-01 [Discontinued]Sealed Inert Gas Oven (Forced Convection System) IGO-310
Product Description
Product Model: 3-6761-01Product Brand: AS ONE Corporati […]
Contact Us
Product Details
Product Model: 3-6761-01
Product Brand: AS ONE Corporation
Features
- Possible to reduce oxygen concentration to ultimate level beca*** gas replacement takes place after vacuum state is created in oven.
- Excellent in temperature distribution beca*** of forced circulation of inert gas inside.
Spec
- Type number: IGO-310
- external dimensions (mm): 453 x 506 x 619
- Available inner size (mm): 300 x 300 x 250
- temperature settings range: 40 to 250 ° C
- Temperature distribution width: ± 10 ° C (at 250 ° C)
- Vacuum range: 0.1 to 101 kPa
- Timer function: ON timer, OFF timer, SV timer, SV start
- Control Method: PID SSR control
- Safety device: Liquid expansion thermostat, self-diagnosis function, overcurrent breaker and positive pressure valve
- shelf board: 2 pieces (Included)
- Heater capacity: 1020 W
- power supply: 100 V 50 / 60Hz 11 A
- material: Valve / brass (step drill outer diameter φ 13 mm), shoulder packing / fluorine rubber
- * When the gas flows, *** a secondary pressure of 0.1 MPa or less below L/min
- * It cannot be ***d under pressure conditions.
Related product recommendations
You may also be interested in the following products
61-9724-49-20 Shorty Pipette (Scale for Common Tip) 1 mL with Calibration Certificate E-PIPET-ST1
model: 61-9724-49-20
brand: AGC TECHNO GLASS (IWAKI)
62-2320-08 Test Sieve SUS Utility Model φ 200 mm, Depth 45 mm, Mesh Opening 5.60 mm, with Calibration Certification
model: 62-2320-08
brand: SIEVE FACTORY IIDA CO., LTD.