
laboratoryinstruments
65-0569-79 Coolace, a large cooling water circulator CA-352H
Product Description
Product Model: 65-0569-79Product Brand: TOKYO RIKAKIKAI […]
Contact Us
Product Details
Product Model: 65-0569-79
Product Brand: TOKYO RIKAKIKAI CO., LTD.
Features
- Cooling capacity ~ 30,000 W, for cooling large equipment
- Water tank and piping are made of SUS, water and air cooling are provided
- High-power refrigerator is installed, so cooling capacity is large, and it can be ***d efficiently instead of tap water from small to large equipment.
- The water tank and piping are stainless steel (SUS304) and designed to prevent rust.
- The circulating pump delivers 25/34L/min (50/60Hz) at a pressure of 0.2 MPa (2kgf/cm2) and is suitable for cooling laser equipment, electron microscopes, cooling fins, heat exchangers, atomic absorption and evaporators.
- Temperature adjustment is digital setting and display.
- The discharge port of the circulation pump has a discharge flow adjustment valve and a bypass valve, so it is easy to adjust the discharge flow rate.
- The heater function can be added, the high-pressure pump can be installed, and the SUS specification of the contact part can be ***d. (Special Order Specifications)
Spec
- Cooling/Circulation System: Air Cooled/Sealed System Directional Circulation
- Performance:
- Temperature setting range/Temperature control accuracy: 5 ~ 25 degrees C (without heater)/+/- 2 degrees C
- Cooling capacity and external circulation capacity: see PDF for data
- Features:
- Temperature control (sensor): Refrigerator ON-OFF control (platinum temperature measuring resistor Pt 100 ohm)
- Temperature setting and display: Key input, digital display, minimum digit 0.1 degrees C
- Safety functions: water level drop detection, refrigerator high and low pressure switch, earth leakage breaker, antifreeze
- Configuration:
- Refrigerator Output/Refrigerant: 1.5 kW/R 407 C
- Heat exchanger: coil type
- Circulation pump: Cascade pump output: 400 W
- Standard:
- External circulation connection port: both discharge port and return port 1/2 B
- Water Tank Material/Capacity: SUS 304/65 L
- Operating ambient temperature range: 5 ~ 35 degrees C
- External dimensions (mm): 820 (950) W x 750 D x 1285 (1360) H
- Mass: 180 kg
- Power input/power voltage (50/60 Hz): 9.0/9.4 A
- Power utility: 200 VAC 3-phase 20 A capacity
- *Performance is measured at room temperature of 20 degrees Celsius, clean water, rated power supply voltage, 50 Hz and no load.
- *Cooling capacity is +/- 10% of display capacity.
- *Dimensions in parentheses include projections.
- *Pure water can not be ***d.
- Power plug not included.
- Code: 225780
Related product recommendations
You may also be interested in the following products
65-6856-93 Chromatograph Tube Inner Diameter 10 x PTFE Cock Filter G-Column Length 100 mm Filter No. 1 2402-11-1-1
model: 65-6856-93
brand: VIDTEC
1-6611-01 [Discontinued]Silicone Tube for Pump 1 x 3 F05603
model: 1-6611-01
brand: Saint-Gobain SA
1-9001-51-22 Constant-Temperature Drying Oven (Natural Convection System) Stainless Steel Type With Window (Left Pivot Door) With Pre-Shipment Inspection Certificate SONW-300SB
model: 1-9001-51-22
brand: AS ONE Corporation
2-4963-11 Block 1.5mL Microtube for 40 Tubes, for Cool and Hot Block Bath T1.5-40
model: 2-4963-11
brand: AS ONE Corporation