toner
64-9698-25 Portable Flammable Gas Detector (for High Concentration Measurement) NP-1000 Methane Specification NP-1000
Product Description
Product Model: 64-9698-25Product Brand: RIKEN KEIKI Co. […]
Contact Us
Product Details
Product Model: 64-9698-25
Product Brand: RIKEN KEIKI Co., Ltd.
Features
- For High Concentration Measurement
- BASE gas can be selected! All 5 Types of Gases Can Be Detected/Concentration Direct Reading with One Unit!!
- BASE gas (Air, N2, CO2) can be selected.
- Measurement Gas Type (Methane, Propane, Isobutane, Argon, Helium) Switchable
- Automatic Range Switching Type (Low range: 0-10.0vol%⇔High range: 0-100vol%/2 ranges of Low/High are automatically switched according to the measured value.)
- Standard probe can be equipped with a cartridge filter (sold separately) (hydrogen sulfide removal filter and silicone removal filter can be mounted. The probe can be arranged for *** in workplaces where hydrogen sulfide or silicone can damage the sensor.)
Spec
- Detection gas: Flammable gas (CH4, etc.)
- Detection principle: heat conduction type
- Measurement range: 0-100vol%
- Type of alarm: < Gas alarm >ON/OFF settable (OFF at the time of delivery), alarm point optional settable, automatic return < Failure alarm > Flow drop, sensor connection failure, battery voltage drop, circuit failure, calibration range failure
- Alarm Operation: < Gas Alarm > Buzzer Continuously, Alarm Lamp (Red) Flashing, Gas Concentration Flashing (When Alarm is set to ON) < Failure Alarm > Buzzer Intermittent, Alarm Lamp (Red) Flashing, Failure Description Display
- Indication accuracy: ±5vol% (same conditions)
- Detection Method: Pump Suction Type, Flow Rate 0.3 L/min or More (Pump: L Mode)
- Display: LCD 7-segment numerical value display + bar meter (50 segments) + status information display/7-segment digital numerical value display: 0-100vol%/Digital bar meter display: Auto range switching 0-10.0vol% (L range)/0-100vol% (H range)
- Power: 4 AA alkaline batteries (In order to satisfy the explosion-proof performance requirements, *** the battery specified in the explosion-proof structure electric machine equipment type approval certificate.)
- Continuous Use: Approximately 30 hours (New battery, no alarm, no lighting, at 25°C)
- Operating Temperature Range: -20 to +50°C
- Operating humidity range: 95%RH or less (no condensation)
- External Dimensions (mm): Approx. 80 (W) x 124 (H) x 36 (D) (Excluding Protrusions)
- Weight (g): Approx. 260 (excluding batteries)
- Dustproof/Drip-proof Structure: Equivalent to IP67
- Explosion-Proof: Intrinsically Safe Explosion-Proof Structure Ex ia IIC T4 (TIIS Explosion-Proof Test)
- Function: LCD backlight, data logger, log data display, peak display, pump suction amount switching, gas reading change, balance gas selection
Related product recommendations
You may also be interested in the following products
toner
3-8926-01-20 K Thermocouple (M3Y terminal type) with Calibration Certificate KTO-4850M3
model: 3-8926-01-20
brand: AS ONE Corporation
toner
toner
1-619-02 Thermo-Hygro Recorder for Sigma II Type Cartridge Pen (Red) SK051-079 No. 3710
model: 1-619-02
brand: Sato Keiryoki Mfg. Co., Ltd.
toner
61-0066-34 Temperature Sensor for pH Meter 640S-T
model: 61-0066-34
brand: Sato Keiryoki Mfg. Co., Ltd.