Features

• Hardshell plastic case with protective foam, USB cable. Nexys 4 DDR Artix-7 FPGA Trainer Board. The Nexys 4 is an FPGA development board designed for the educational market, featuring Xilinx Artix-7 architecture. The Nexys 4 DDR is compatible with the high-performance Vivado Design Suite as well as the ISE® toolset, which includes ChipScope™ and EDK. WebPACK editions of these toolsets can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition. Xilinx Artix-7 FPGA (XC7A100T-1CSG324C) Features. 101440 logic cells in 15850 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops). 4860Kbit Fast Block RAM. 6 x Clock Management Tiles, each with a phase-locked loop (PLL). 240 x DSP slices. Internal clock speeds exceeding 450MHz. On-chip Analogue-to-Digital Converter (XADC). Nexys 4 DDR Board Features. MT47H64M16HR-25 128MiB DDR2 SDRAM S25FL128S 16MiB Quad-SPI Serial Flash memory ADXL362 SPI bus 3-axis accelerometer ADT7420 I²C bus temperature sensor ADMP421 MEMS microphone with PDM output Programmable over JTAG, Quad-SPI or USB FPGA Programming-Done LED 2 x 4-digit 7-segment LED displays 16 x User LEDs 2 x User RGB LEDs 5 x User Pushbuttons 16 x User Slide-Switches USB-UART Bridge via microUSB socket USB-A HID Host socket for mice, keyboards and memory sticks 12-bit VGA display output on DE15 connector RJ45 socket for 10/100 Ethernet connection 3.5mm jack socket for mono audio output microSD card slot 4 x Standard Pmod™ 2 x 6-pin connectors Analogue XADC Pmod™ 2 x 6-pin connector Powered from either USB, barrel jack socket or external battery pack