Features

• This product was developed to join materials such as polyethylene and PTFE, which were difficult or impossible to join with conventional adhesives.
• Water resistance is perfect and salt water resistant.
• For general ***, it exhibits the best characteristics under temperatures of about −10 °C to +50 °C.
• At 20°C (room temperature), the viscosity doubles after 72 hours.
• The best feature is that it is made from special synthetic resin and does not contain solvents. For this reason, the part that has been put together after *** does not harden and has a cushioning effect, so it can be bent.
• Adhesive force (adhesion force) is strong even for non-polar surfaces such as polyethylene and PTFE, and rough surfaces such as plywood, concrete and iron without selecting adher***s.
• Since there is no need for special treatment to improve the bonding and the adhesive force (adhesive force) is strong, the amount of *** is small and very economical.
• Apply silicone solution (or oil) to scissors, knife, etc., and cut. When you remove it, you can remove the rest by rolling it with tricrene, benzine, etc.
• Keep the tape warm during the cold season, and sometimes it is necessary to warm it when working.
• Remove dust, oil, water and other foreign matter from the surface of the adher***.